 | 100 Gallon Per Day 6-Stage Home Reverse Osmosis Drinking Water System with Ultraviolet Disinfection Brand: AMI RO Systems Part Number: AAA-1006UVU <b>AMI 5-Stage Home Reverse Osmosis System w/ UV Sterilization</b><p>AMI systems use state of the art technology to produce clean water for drinking, cooking & other household uses. Our residential RO Systems are complete with pre filters and post filters and come with a 3 gallon storage tank and installation kit<b>. </b></p><p><b><i>This unit includes an Ultraviolet System. </i></b>System provides additional safety and purification of your drinking water through use of the R-Can Copper UV system. This system destroys 99.99% bacteria, virus and protozoan cyst (specifically giardia lamblia and cryptosporidium).</p><p><b>*Supplied with voltage & power cable for USA. Other voltage options available upon request*</b></p><p>Completely Assembled and Ready to Install!</p><li><u><b>Stage 1 - Sediment:</b></u> 5 Micron Sediment filter to remove dirt, rust and other suspended particles.</li><li><b><u>Stage 2 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and odor.</li><li><b><u>Stage 3 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and odor.</li><li><b><u>Stage 4 - Reverse Osmosis:</u></b> Thin Film Reverse Osmosis Membrane to remove 99% of dissolved solids. housing. </li><li><b><u>Stage 5 - Polishing Filter:</u></b> The water runs through an in-line carbon filter to remove any taste or odor.<body><li><b><u>Stage 6 - Ultraviolet Sterilizer:</u></b> The water runs through a UV disinfection system just before dispensing from the faucet for 99.99% destruction of bacteria, virus & protozoan cysts.</li></body><p>AMI AAA Series RO Systems are made of high quality, industry proven components. The high quality RO Membrane used is NSF Certified for assurance of the highest and most reliable water quality possible. Manufactured in the United States by Applied Membranes, Inc. - an ISO 9001:2008 Certified Company to assure a high performance quality-guaranteed product every time! | *$329.79 |
 | 50 Gallon Per Day 5-Stage Home Reverse Osmosis Drinking Water System Brand: AMI RO Systems Part Number: AAA-505 <b>AMI 5-Stage Home Reverse Osmosis System</b><p>AMI AAA Series systems use state of the art technology to produce clean water for drinking, cooking and other household uses. Our residential RO Systems are complete with pre filters and post filters and come with a 3 gallon storage tank and installation kit<b>. </b></p><p>Completely Assembled and Ready to Install (with detailed step by step installation instructions).</p><li><u><b>Stage 1 - Sediment:</b></u> 5 Micron Sediment filter to remove dirt, rust and other suspended particles - installed in a white filter housing. </li><li><b><u>Stage 2 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and other - installed in a white filter housing. </li><li><b><u>Stage 3 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and other - installed in a white filter housing. </li><li><b><u>Stage 4 - Reverse Osmosis:</u></b> Thin Film Reverse Osmosis Membrane to remove 99% of dissolved solids, installed in a white membrane housing. </li><li><b><u>Stage 5 - Polishing Filter:</u></b> The water runs through an in-line carbon filter to remove any taste or odor it may have acquired in the storage tank.</li><p>AMI AAA Series RO Systems are made of high quality, industry proven components. The high quality RO Membrane used is NSF Certified for assurance of the highest and most reliable water quality possible. Manufactured in the United States by Applied Membranes, Inc. - an ISO 9001:2008 Certified Company to assure a high performance quality-guaranteed product every time!</p> | *$149.79 |
 | 75 Gallon Per Day 6-Stage Home Reverse Osmosis Drinking Water System with Ultraviolet Disinfection Brand: AMI RO Systems Part Number: AAA-756UVU <b>AMI 5-Stage Home Reverse Osmosis System w/ UV Sterilization</b><p>AMI systems use state of the art technology to produce clean water for drinking, cooking & other household uses. Our residential RO Systems are complete with pre filters and post filters and come with a 3 gallon storage tank and installation kit<b>. </b></p><p><b><i>This unit includes an Ultraviolet System. </i></b>System provides additional safety and purification of your drinking water through use of the R-Can Copper UV system. This system destroys 99.99% bacteria, virus and protozoan cyst (specifically giardia lamblia and cryptosporidium).</p><p><b>*Supplied with voltage & power cable for USA. Other voltage options available upon request*</b></p><p>Completely Assembled and Ready to Install!</p><li><u><b>Stage 1 - Sediment:</b></u> 5 Micron Sediment filter to remove dirt, rust and other suspended particles.</li><li><b><u>Stage 2 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and odor.</li><li><b><u>Stage 3 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and odor.</li><li><b><u>Stage 4 - Reverse Osmosis:</u></b> Thin Film Reverse Osmosis Membrane to remove 99% of dissolved solids. housing. </li><li><b><u>Stage 5 - Polishing Filter:</u></b> The water runs through an in-line carbon filter to remove any taste or odor.<body><li><b><u>Stage 6 - Ultraviolet Sterilizer:</u></b> The water runs through a UV disinfection system just before dispensing from the faucet for 99.99% destruction of bacteria, virus & protozoan cysts.</li></body><p>AMI AAA Series RO Systems are made of high quality, industry proven components. The high quality RO Membrane used is NSF Certified for assurance of the highest and most reliable water quality possible. Manufactured in the United States by Applied Membranes, Inc. - an ISO 9001:2008 Certified Company to assure a high performance quality-guaranteed product every time! | *$299.79 |
 | 36 Gallon Per Day 6-Stage Home Reverse Osmosis Drinking Water System with Ultraviolet Disinfection Brand: AMI RO Systems Part Number: AAA-366UVU <b>AMI 5-Stage Home Reverse Osmosis System w/ UV Sterilization</b><p>AMI systems use state of the art technology to produce clean water for drinking, cooking & other household uses. Our residential RO Systems are complete with pre filters and post filters and come with a 3 gallon storage tank and installation kit<b>. </b></p><p><b><i>This unit includes an Ultraviolet System. </i></b>System provides additional safety and purification of your drinking water through use of the R-Can Copper UV system. This system destroys 99.99% bacteria, virus and protozoan cyst (specifically giardia lamblia and cryptosporidium).</p><p><b>*Supplied with voltage & power cable for USA. Other voltage options available upon request*</b></p><p>Completely Assembled and Ready to Install!</p><li><u><b>Stage 1 - Sediment:</b></u> 5 Micron Sediment filter to remove dirt, rust and other suspended particles.</li><li><b><u>Stage 2 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and odor.</li><li><b><u>Stage 3 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and odor.</li><li><b><u>Stage 4 - Reverse Osmosis:</u></b> Thin Film Reverse Osmosis Membrane to remove 99% of dissolved solids. housing. </li><li><b><u>Stage 5 - Polishing Filter:</u></b> The water runs through an in-line carbon filter to remove any taste or odor.<body><li><b><u>Stage 6 - Ultraviolet Sterilizer:</u></b> The water runs through a UV disinfection system just before dispensing from the faucet for 99.99% destruction of bacteria, virus & protozoan cysts.</li></body><p>AMI AAA Series RO Systems are made of high quality, industry proven components. The high quality RO Membrane used is NSF Certified for assurance of the highest and most reliable water quality possible. Manufactured in the United States by Applied Membranes, Inc. - an ISO 9001:2008 Certified Company to assure a high performance quality-guaranteed product every time! | *$279.79 |
 | 50 Gallon Per Day 6-Stage Home Reverse Osmosis Drinking Water System with Ultraviolet Disinfection Brand: AMI RO Systems Part Number: AAA-506UVU <b>AMI 5-Stage Home Reverse Osmosis System w/ UV Sterilization</b><p>AMI systems use state of the art technology to produce clean water for drinking, cooking & other household uses. Our residential RO Systems are complete with pre filters and post filters and come with a 3 gallon storage tank and installation kit<b>. </b></p><p><b><i>This unit includes an Ultraviolet System. </i></b>System provides additional safety and purification of your drinking water through use of the R-Can Copper UV system. This system destroys 99.99% bacteria, virus and protozoan cyst (specifically giardia lamblia and cryptosporidium).</p><p><b>*Supplied with voltage & power cable for USA. Other voltage options available upon request*</b></p><p>Completely Assembled and Ready to Install!</p><li><u><b>Stage 1 - Sediment:</b></u> 5 Micron Sediment filter to remove dirt, rust and other suspended particles.</li><li><b><u>Stage 2 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and odor.</li><li><b><u>Stage 3 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and odor.</li><li><b><u>Stage 4 - Reverse Osmosis:</u></b> Thin Film Reverse Osmosis Membrane to remove 99% of dissolved solids. housing. </li><li><b><u>Stage 5 - Polishing Filter:</u></b> The water runs through an in-line carbon filter to remove any taste or odor.<body><li><b><u>Stage 6 - Ultraviolet Sterilizer:</u></b> The water runs through a UV disinfection system just before dispensing from the faucet for 99.99% destruction of bacteria, virus & protozoan cysts.</li></body><p>AMI AAA Series RO Systems are made of high quality, industry proven components. The high quality RO Membrane used is NSF Certified for assurance of the highest and most reliable water quality possible. Manufactured in the United States by Applied Membranes, Inc. - an ISO 9001:2008 Certified Company to assure a high performance quality-guaranteed product every time! | *$289.79 |
 | 75 Gallon Per Day 5-Stage Home Reverse Osmosis Drinking Water System Brand: AMI RO Systems Part Number: AAA-755 <b>AMI 5-Stage Home Reverse Osmosis System</b><p>AMI AAA Series systems use state of the art technology to produce clean water for drinking, cooking and other household uses. Our residential RO Systems are complete with pre filters and post filters and come with a 3 gallon storage tank and installation kit<b>. </b></p><p>Completely Assembled and Ready to Install (with detailed step by step installation instructions).</p><li><u><b>Stage 1 - Sediment:</b></u> 5 Micron Sediment filter to remove dirt, rust and other suspended particles - installed in a white filter housing. </li><li><b><u>Stage 2 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and other - installed in a white filter housing. </li><li><b><u>Stage 3 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and other - installed in a white filter housing. </li><li><b><u>Stage 4 - Reverse Osmosis:</u></b> Thin Film Reverse Osmosis Membrane to remove 99% of dissolved solids, installed in a white membrane housing. </li><li><b><u>Stage 5 - Polishing Filter:</u></b> The water runs through an in-line carbon filter to remove any taste or odor it may have acquired in the storage tank.</li><p>AMI AAA Series RO Systems are made of high quality, industry proven components. The high quality RO Membrane used is NSF Certified for assurance of the highest and most reliable water quality possible. Manufactured in the United States by Applied Membranes, Inc. - an ISO 9001:2008 Certified Company to assure a high performance quality-guaranteed product every time!</p> | *$149.79 |
 | 36 Gallon Per Day 5-Stage Home Reverse Osmosis Drinking Water System Brand: AMI RO Systems Part Number: AAA-365 <b>AMI 5-Stage Home Reverse Osmosis System</b><p>AMI AAA Series systems use state of the art technology to produce clean water for drinking, cooking and other household uses. Our residential RO Systems are complete with pre filters and post filters and come with a 3 gallon storage tank and installation kit<b>. </b></p><p>Completely Assembled and Ready to Install (with detailed step by step installation instructions).</p><li><u><b>Stage 1 - Sediment:</b></u> 5 Micron Sediment filter to remove dirt, rust and other suspended particles - installed in a white filter housing. </li><li><b><u>Stage 2 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and other - installed in a white filter housing. </li><li><b><u>Stage 3 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and other - installed in a white filter housing. </li><li><b><u>Stage 4 - Reverse Osmosis:</u></b> Thin Film Reverse Osmosis Membrane to remove 99% of dissolved solids, installed in a white membrane housing. </li><li><b><u>Stage 5 - Polishing Filter:</u></b> The water runs through an in-line carbon filter to remove any taste or odor it may have acquired in the storage tank.</li><p>AMI AAA Series RO Systems are made of high quality, industry proven components. The high quality RO Membrane used is NSF Certified for assurance of the highest and most reliable water quality possible. Manufactured in the United States by Applied Membranes, Inc. - an ISO 9001:2008 Certified Company to assure a high performance quality-guaranteed product every time!</p> | *$149.79 |
 | 50 Gallon Per Day 5-Stage Home Reverse Osmosis Drinking Water System with Booster Pump Brand: AMI RO Systems Part Number: AAA-505PU <b>AMI 5-Stage Home Reverse Osmosis System w/ Feed Booster Pump</b><p>AMI systems use state of the art technology to produce clean water for drinking, cooking & other household uses. Our residential RO Systems are complete with pre filters and post filters and come with a 3 gallon storage tank and installation kit<b>. </b></p><p><i><b>This unit includes a booster pump: </b></i>Water pressure is necessary to force the water through the membrane and to flush the rejected solids out of the element, and is directly related to production and quality of filtration. Low pressure can result in low production, low rejection, and premature fouling of the membrane. The ideal pressure for an RO System is approximately 60 PSI. If your water pressure is below 40 PSI, a booster pump is required to boost the water pressure.</p><p><b>*Supplied with voltage & power cable for USA. Other voltage options available upon request*</b></p><p>Completely Assembled and Ready to Install!</p><li><u><b>Stage 1 - Sediment:</b></u> 5 Micron Sediment filter to remove dirt, rust and other suspended particles.</li><li><b><u>Stage 2 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and odor.</li><li><b><u>Stage 3 - Carbon:</u></b> Carbon Block Filter Cartridge to remove chlorine, taste and odor.</li><li><b><u>Stage 4 - Reverse Osmosis:</u></b> Thin Film Reverse Osmosis Membrane to remove 99% of dissolved solids. housing.</li><li><b><u>Stage 5 - Polishing Filter:</u></b> The water runs through an in-line carbon filter to remove any taste or odor it may have acquired in the storage tank.</li><p>AMI AAA Series RO Systems are made of high quality, industry proven components. The high quality RO Membrane used is NSF Certified for assurance of the highest and most reliable water quality possible. Manufactured in the United States by Applied Membranes, Inc. - an ISO 9001:2008 Certified Company to assure a high performance quality-guaranteed product every time! | *$279.79 |
 | 2.5"×14" Seawater RO Membrane, 150 GPD Brand: AMI Seawater Membranes Part Number: M-S2514A <p>AMI Seawater Desalination Reverse Osmosis Membranes produce high quality drinking water from seawater and are designed for use in WaterMakers , Shipboard Applications, Land-and-Sea Based Desalinators. These elements are constructed of DOW RO Flat Sheet and are made in the USA in our ISO 9001:2008 Certified manufacturing plant. Membrane elements are wrapped in fiberglass to increased pressure and TDS tolerance.</p><ul> <li>100% Quality Check and Integrity Tested</li> <li>Fits Standard 2.5"x14" Fiberglass Seawater Membrane Housings</li> <li>High Quality RO Membranes with Consistent Performance</li> <li>Large Stock for Quick Delivery</li> <li>Made in the USA using DOW RO Flat Sheet Membrane</li></ul><p>Applied Membranes is a major supplier of RO membranes which are sold under the AMI brand. Since 1983, Applied Membranes has manufactured hundreds of thousands of RO Membranes; these elements have earned the reputation of consistent quality, reliability and performance. </p><p><u><b>This element can be used as replacements in WaterMaker Seawater Desalinator RO Systems</b></u></p><p><u><b>Operating Conditions:</b></u></p><p>Performance specifications based on 32,000 mg/l sodium chloride, 800 psi (5.5 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and 2% Recovery. Element permeate flow may vary ± 20%.<br> </p><p>Maximum operation pressure: 1000 psi (6.9 MPa)<br>Maximum feed flow rate: 18 gpm<br>Maximum operating temperature: 113° F (45° C)<br>Maximum feed water turbidity: 1 NTU<br>Maximum feed water SDI (15min): 5<br>Chlorine tolerance: >0.1 PPM<br>Feedwater pH range (Continuous): 2-11<br>Feedwater pH Range (Cleaning, 30 mins): 1-12</p> | *$146.99 |
 | 2.5"×21" Seawater RO Membrane, 300 GPD Brand: AMI Seawater Membranes Part Number: M-S2521A <p>AMI Seawater Desalination Reverse Osmosis Membranes produce high quality drinking water from seawater and are designed for use in WaterMakers , Shipboard Applications, Land-and-Sea Based Desalinators. These elements are constructed of DOW RO Flat Sheet and are made in the USA in our ISO 9001:2008 Certified manufacturing plant. Membrane elements are wrapped in fiberglass to increased pressure and TDS tolerance.</p><ul> <li>100% Quality Check and Integrity Tested</li> <li>Fits Standard 2.5"x21" Fiberglass Seawater Membrane Housings</li> <li>High Quality RO Membranes with Consistent Performance</li> <li>Large Stock for Quick Delivery</li> <li>Made in the USA using DOW RO Flat Sheet Membrane</li></ul><p>Applied Membranes is a major supplier of RO membranes which are sold under the AMI brand. Since 1983, Applied Membranes has manufactured hundreds of thousands of RO Membranes; these elements have earned the reputation of consistent quality, reliability and performance. </p><p><u><b>This element can be used as replacements in WaterMaker Seawater Desalinator RO Systems</b></u></p><p><u><b>Operating Conditions:</b></u></p><p>Performance specifications based on 32,000 mg/l sodium chloride, 800 psi (5.5 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and 4% Recovery. Element permeate flow may vary ± 20%.<br> </p><p>Maximum operation pressure: 1000 psi (6.9 MPa)<br>Maximum feed flow rate: 18 gpm<br>Maximum operating temperature: 113° F (45° C)<br>Maximum feed water turbidity: 1 NTU<br>Maximum feed water SDI (15min): 5<br>Chlorine tolerance: >0.1 PPM<br>Feedwater pH range (Continuous): 2-11<br>Feedwater pH Range (Cleaning, 30 mins): 1-12</p> | *$165.00 |
 | 2.5"×40" Seawater RO Membrane, 700 GPD Brand: AMI Seawater Membranes Part Number: M-S2540A <p>AMI Seawater Desalination Reverse Osmosis Membranes produce high quality drinking water from seawater and are designed for use in WaterMakers , Shipboard Applications, Land-and-Sea Based Desalinators. These elements are constructed of DOW RO Flat Sheet and are made in the USA in our ISO 9001:2008 Certified manufacturing plant. Membrane elements are wrapped in fiberglass to increased pressure and TDS tolerance.</p><ul> <li>100% Quality Check and Integrity Tested</li> <li>Fits Standard 2.5"x40" Fiberglass Seawater Membrane Housings</li> <li>High Quality RO Membranes with Consistent Performance</li> <li>Large Stock for Quick Delivery</li> <li>Made in the USA using DOW RO Flat Sheet Membrane</li></ul><p>Applied Membranes is a major supplier of RO membranes which are sold under the AMI brand. Since 1983, Applied Membranes has manufactured hundreds of thousands of RO Membranes; these elements have earned the reputation of consistent quality, reliability and performance. </p><p><u><b>This element can be used as replacements in WaterMaker Seawater Desalinator RO Systems</b></u></p><p><u><b>Operating Conditions:</b></u></p><p>Performance specifications based on 32,000 mg/l sodium chloride, 800 psi (5.5 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and 8% Recovery. Element permeate flow may vary ± 20%.<br> </p><p>Maximum operation pressure: 1000 psi (6.9 MPa)<br>Maximum feed flow rate: 18 gpm<br>Maximum operating temperature: 113° F (45° C)<br>Maximum feed water turbidity: 1 NTU<br>Maximum feed water SDI (15min): 5<br>Chlorine tolerance: >0.1 PPM<br>Feedwater pH range (Continuous): 2-11<br>Feedwater pH Range (Cleaning, 30 mins): 1-12</p> | *$183.35 |
 | 4"×40" Seawater RO Membrane, 1950 GPD Brand: AMI Seawater Membranes Part Number: M-S4040A <p>AMI Seawater Desalination Reverse Osmosis Membranes produce high quality drinking water from seawater and are designed for use in WaterMakers , Shipboard Applications, Land-and-Sea Based Desalinators. These elements are constructed of DOW RO Flat Sheet and are made in the USA in our ISO 9001:2008 Certified manufacturing plant. Membrane elements are wrapped in fiberglass to increased pressure and TDS tolerance.</p><ul> <li>100% Quality Check and Integrity Tested</li> <li>Fits Standard 4"x40" Fiberglass Seawater Membrane Housings</li> <li>High Quality RO Membranes with Consistent Performance</li> <li>Large Stock for Quick Delivery</li> <li>Made in the USA using DOW RO Flat Sheet Membrane</li></ul><p>Applied Membranes is a major supplier of RO membranes which are sold under the AMI brand. Since 1983, Applied Membranes has manufactured hundreds of thousands of RO Membranes; these elements have earned the reputation of consistent quality, reliability and performance. </p><p><u><b>This element can be used as replacements in WaterMaker Seawater Desalinator RO Systems</b></u></p><p><u><b>Operating Conditions:</b></u></p><p>Performance specifications based on 32,000 mg/l sodium chloride, 800 psi (5.5 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and 8% Recovery. Element permeate flow may vary ± 20%.<br> </p><p>Maximum operation pressure: 1000 psi (6.9 MPa)<br>Maximum feed flow rate: 18 gpm<br>Maximum operating temperature: 113° F (45° C)<br>Maximum feed water turbidity: 1 NTU<br>Maximum feed water SDI (15min): 5<br>Chlorine tolerance: >0.1 PPM<br>Feedwater pH range (Continuous): 2-11<br>Feedwater pH Range (Cleaning, 30 mins): 1-12</p> | *$323.13 |
 | 10" Std 5M Sediment Filter Pleated Brand: AMI Sediment Filters Part Number: H-FS105PCAMI <b>AMI Filters - Pleated Cellulose Poly Sediment Filter Cartridges</b><ul> <li> Pleated Design Provides Enhanced Dirt-Holding Capacity for Extended Life of Cartridge</li> <li> 5 Micron Filtration Rating</li> <li> 2.5" Diameter x 10" Length - to Fit Most Standard 10" Filter Housings</li></ul> | *$7.22 |
 | 20"Big Blue 1 Micron Sediment Filters Brand: AMI Sediment Filters Part Number: H-F20BB01CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 1 Micron Filtration Rating</li> <li> 4.25" Diameter x 20" Length - to Fit Most 20" Big Blue Filter Housings</li></ul><p><u><b>This filter can be used as sediment pre-filter in RO Systems, or as a Whole-House Filter</b></u></p> | *$38.00 |
 | 20" 20 Micron Sediment Filters Polyspun Brand: AMI Sediment Filters Part Number: H-F2020CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 20 Micron Filtration Rating</li> <li>2.5" Diameter x 20" Length - to Fit Most Standard 20" Filter Housings</li></ul> | *$4.99 |
 | 10" 5M String-Wound Sediment Filter Brand: AMI Sediment Filters Part Number: H-F1005STR <b>AMI Filters - String Wound Sediment Filter Cartridges</b><ul> <li> String-Wound Construction Provides Enhanced Dirt-Holding Capacity for Extended Life of Cartridge</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 5 Micron Filtration Rating</li> <li> 2.5" Diameter x 9.75" Length - to Fit Most Standard 10" Filter Housings</li></ul><p><u><b>This filter can be used as sediment pre-filter in RO Systems, or as a Whole-House Filter</b></u></p> | *$4.47 |
 | 20" 50 Micron Sediment Filters Polyspun Brand: AMI Sediment Filters Part Number: H-F2050CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 50 Micron Filtration Rating</li> <li>2.5" Diameter x 20" Length - to Fit Most Standard 20" Filter Housings</li></ul> | *$4.99 |
 | 20" 5 Micron Sediment Filters Polyspun Brand: AMI Sediment Filters Part Number: H-F2005CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 5 Micron Filtration Rating</li> <li>2.5" Diameter x 20" Length - to Fit Most Standard 20" Filter Housings</li></ul> | *$4.69 |
 | 10" 5 Micron Sediment Filters Polyspun Brand: AMI Sediment Filters Part Number: H-F1005CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> | *$3.58 |
 | 20"Big Blue 5 Micron Sediment Filters Brand: AMI Sediment Filters Part Number: H-F20BB05CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 5 Micron Filtration Rating</li> <li> 4.25" Diameter x 20" Length - to Fit Most 20" Big Blue Filter Housings</li></ul><p><u><b>This filter can be used as sediment pre-filter in RO Systems, or as a Whole-House Filter</b></u></p> | *$36.00 |
 | 10" 10 Micron Sediment Filters Polyspun Brand: AMI Sediment Filters Part Number: H-F1010CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 10 Micron Filtration Rating</li> <li>2.5" Diameter x 9.75" Length - to Fit Most Standard 10" Filter Housings</li></ul><p><u><b>This filter can be used as sediment pre-filter replacement in Home RO Systems.</b></u></p> | *$3.90 |
 | 20" 5M String-Wound Sediment Filter Brand: AMI Sediment Filters Part Number: H-F2005STR <b>AMI Filters - String Wound Sediment Filter Cartridges</b><ul> <li> String-Wound Construction Provides Enhanced Dirt-Holding Capacity for Extended Life of Cartridge</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 5 Micron Filtration Rating</li> <li> 2.5" Diameter x 20" Length - to Fit Most Standard 20" Filter Housings</li></ul><p><u><b>This filter can be used as sediment pre-filter in RO Systems, or as a Whole-House Filter</b></u></p> | *$6.01 |
 | 10" Big Blue 5M Sediment Filter Pleated Brand: AMI Sediment Filters Part Number: H-FS10BB5PCAMI <b>AMI Filters - Pleated Cellulose Poly Sediment Filter Cartridges</b><ul> <li> Pleated Design Provides Enhanced Dirt-Holding Capacity for Extended Life of Cartridge</li> <li> 5 Micron Filtration Rating</li> <li> 4.25" Diameter x 10" Length - to Fit Most 10" Big Blue Filter Housings</li></ul> | *$12.63 |
 | 10" 50 Micron Sediment Filters Polyspun Brand: AMI Sediment Filters Part Number: H-F1050CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 50 Micron Filtration Rating</li> <li>2.5" Diameter x 9.75" Length - to Fit Most Standard 10" Filter Housings</li></ul><p><u><b>This filter can be used as sediment pre-filter replacement in Home RO Systems.</b></u></p> | *$3.83 |
 | 20" Big Blue 5M Sediment Filter Pleated Brand: AMI Sediment Filters Model: H-FS20BB5PCAMI Part Number: H-FS20BB5PCAMI <b>AMI Filters - Pleated Cellulose Poly Sediment Filter Cartridges</b><ul> <li> Pleated Design Provides Enhanced Dirt-Holding Capacity for Extended Life of Cartridge</li> <li> 5 Micron Filtration Rating</li> <li> 4.25" Diameter x 20" Length - to Fit Most 20" Big Blue Filter Housings</li></ul> | *$22.75 |
 | 10" 20 Micron Sediment Filters Polyspun Brand: AMI Sediment Filters Part Number: H-F1020CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 20 Micron Filtration Rating</li> <li>2.5" Diameter x 9.75" Length - to Fit Most Standard 10" Filter Housings</li></ul><p><u><b>This filter can be used as sediment pre-filter replacement in Home RO Systems.</b></u></p> | *$3.83 |
 | 10" Big Blue 5 Micron Sediment Filters Brand: AMI Sediment Filters Part Number: H-F10BB05CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 5 Micron Filtration Rating</li> <li> 4.25" Diameter x 9.75" Length - to Fit Most 10" Big Blue Filter Housings</li></ul><p><u><b>This filter can be used as sediment pre-filter in RO Systems, or as a Whole-House Filter</b></u></p> | *$8.40 |
 | 10" 1 Micron Sediment Filters Polyspun Brand: AMI Sediment Filters Part Number: H-F1001CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li>1 Micron Filtration Rating</li> <li>2.5" Diameter x 9.75" Length - to Fit Most Standard 10" Filter Housings</li></ul><p><u><b>This filter can be used as sediment pre-filter replacement in Home RO Systems.</b></u></p> | *$4.03 |
 | 10" 20M String-Wound Sediment Filter Brand: AMI Sediment Filters Part Number: H-F1020STR <b>AMI Filters - String Wound Sediment Filter Cartridges</b><ul> <li> String-Wound Construction Provides Enhanced Dirt-Holding Capacity for Extended Life of Cartridge</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 20 Micron Filtration Rating</li> <li> 2.5" Diameter x 9.75" Length - to Fit Most Standard 10" Filter Housings</li></ul><p><u><b>This filter can be used as sediment pre-filter in RO Systems, or as a Whole-House Filter</b></u></p> | *$4.34 |
 | 20" 10 Micron Sediment Filters Polyspun Brand: AMI Sediment Filters Part Number: H-F2010CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 10 Micron Filtration Rating</li> <li>2.5" Diameter x 20" Length - to Fit Most Standard 20" Filter Housings</li></ul> | *$4.99 |
 | 20" Std. 5M Sediment Filter Pleated Brand: AMI Sediment Filters Model: H-FS205PCAMI Part Number: H-FS205PCAMI <b>AMI Filters - Pleated Cellulose Poly Sediment Filter Cartridges</b><br>
- Pleated Design Provides Enhanced Dirt-Holding Capacity for Extended Life of Cartridge<br>
- 5 Micron Filtration Rating<br>
- 2.5" Diameter x 20" Length - to Fit Most Standard 20" Filter Housings | *$7.83 |
 | 20" 1 Micron Sediment Filters Polyspun Brand: AMI Sediment Filters Part Number: H-F2001CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 1 Micron Filtration Rating</li> <li>2.5" Diameter x 20" Length - to Fit Most Standard 20" Filter Housings</li></ul> | *$4.67 |
 | 10" Big Blue 1 Micron Sediment Filters Brand: AMI Sediment Filters Part Number: H-F10BB01CF <b>AMI Filters - Melt Blown Polypropylene Sediment Filter Cartridges</b><ul> <li>Graded Pore Structure Enhances Dirt-Holding Capacity</li> <li>Easy and Safe Cartridge Incineration and Disposal</li> <li>Free of Surfactants, Binders & Adhesive</li> <li> 1 Micron Filtration Rating</li> <li> 4.25" Diameter x 9.75" Length - to Fit Most 10" Big Blue Filter Housings</li></ul><p><u><b>This filter can be used as sediment pre-filter in RO Systems, or as a Whole-House Filter</b></u></p> | *$8.47 |
| | Amtrol RO-1 Reverse Osmosis Tank (0.77 Gallon; 1/4" MIP) Brand: Amtrol Part Number: 536-11 | *$116.42 |
| | Amway Quixtar A101 Compatible Water Filters Brand: Amway Part Number: A101 <ul><li class="heading">Amway Quixtar A101 Compatible Water Filters Instructions:</li><li>The Amway A101 Filter should be <b>replaced every 6 to 12 months</b>.</li></ul> | *$75.23 |
| | Amway Quixtar Am101 Compatible O-Ring Brand: Amway Part Number: AM-OR | *$13.19 |
| | Amway Quixtar E-9225 Compatible O-Ring Brand: Amway Part Number: AM-OR-E9225 | *$13.19 |
| | Amway Quixtar VA-5436 Compatible O-Ring Brand: Amway Part Number: VA-5436 | *$13.19 |
 | Amway A101, E84, E-85, E-9636, E-9225 & E-9395 Compatible Fit Replacement Water Filter Brand: Amway Compatible Model: A101, E84, E-85, E-9225, Amway ® * A101, E84, E-85, E-9636, E-9225, Compatible Fit Replacement Water Filter - 7 1/4" long X 3 7/8" Diametrer - Fits All Amway Undersink And Countertop Filter Housings -Threaded Connection Threaded screw connection on top of filter for proper connection. Amway ® * A101 , E-84, E-85 & E-9225 Compatible Replacement Water Filters. Fits E84 , E-9325 , E-9225 & E-0085. Does not fit E-9396, E-9395 or 2045AD inline slim refrigerator filter. | *$50.99 |
 | Icemaker Filter Kit (AKF-1) Brand: Anderson Barrows Model: AKF-1 Part Number: AKF-1 Sold as each. 3 years or 10,000 gallons. Reduces chlorine bad taste & odor. Reduces scale build up in appliances. 1/4" compression connection. Comes w/10' PVC supply line. Comes w/1' splicer line. Replacement filter SKU # 4203022. Boxed. Manufacturer number: AKF-1. Country of origin: United States. Distributed by Anderson Barrows. | *$51.99 |
 | Watts Premier High Capacity In-Line Water Filter (PIL-10) Brand: Anderson Barrows Model: PIL-10 Part Number: PIL-10 Sold as each. 10" high. NSF certified universal water filter. For use with refrigerators and ice makers. High quality granular activated carbon with KDF for fighting bacteria and extending the life of filter. Reduces chlorine taste and odor, sediment dirt and rust. Service flow .75 GPM. Pressure range 25-125 PSI. 1200 Gallon Capacity. Manufacturer number: PIL-10. Country of origin: United States. Distributed by Anderson Barrows. | *$9.95 |
 | Icemaker Filter (AKDF-3C) Brand: Anderson Barrows Model: AKDF-3C Part Number: AKDF-3C Sold as each. 3 years or 10,000 gallons. Reduces chlorine bad taste & odor. Reduces scale build up in appliances. 1/4" compression connection. Replacement filter for SKU # 4203048. Boxed. Manufacturer number: AKDF-3C. Country of origin: United States. Distributed by Anderson Barrows. | *$38.95 |
 | Anna Ontario Water Filter Brand: ANNA The water filter improves the quality of tap water and provides clear, clean water to be used for tea, coffee, cooking and tasty drinking water. It avoids scale built-up in household appliances, i.e. coffee machines and irons. The water filter reduces heavy metals, such as lead, copper, and zinc, as well as chlorine, water hardness, organic pollution and pesticides. | *$11.90 |
 | Anna Superior Water Filter Brand: ANNA Model: Superior Part Number: 1300 For large volumes of water, suitable to fit all the latest refrigerator doors. The water filter improves the quality of tap water and provides clear, clean water to be used for tea, coffee, cooking and tasty drinking water. It avoids scale built-up in household appliances, i.e. coffee machines and irons. The water filter reduces heavy metals, such as lead, copper, and zinc, as well as chlorine, water hardness, organic pollution and pesticides. | *$14.90 |
 | 3-Pack Replacement Filters - AnyWater Mini Bio-Mineral Pot Brand: AnyWater Part Number: ANYWAT 3FILT Filter Features Activated Carbon: eliminates contaminants such as chlorine, volatile organic compounds, heavy metals, etc. Silver activated carbon: suppresses bacterial growth Activated Coral Sand: increases alkalinity (pH) and imparts a smooth taste Silica sand: additional sediment filtration Mineral Sand Mixture: Geolite, Somelite, and other minerals increase alkaline trace mineral content Bio-ceramic filter with Somelite coral and magnetic media eliminates bacteria 1300 Refills per filter (approximately 90 days) | *$69.95 |
 | AnyWater Mini Bio-Mineral Pot Produces Alkaline Mineral Water PLUS 3 Replacement Filters Brand: AnyWater Part Number: AnyWater POT The AnyWater Mini Bio Mineral Pot is a terrific portable solution for providing clean drinking water. On top of that, it increases the Alkalinity of your water through the use of all natural minerals. It is compact enough to use for travel, hiking, camping or as a supplement to your Water Ionizer. Can't yet afford a Water Ionizer? Use AnyWater, save the cost of bottled water until you have enough to acquire a machine. You can then use AnyWater for travel situations. Benefits Removes or Reduces contaminants such as chlorine, heavy metals, bacteria, insecticides, and other impurities. Increases Water Alkalinity - up to 9.5 pH obtainable (dependant on source water) Increases antioxidant potential (O.R.P.) up to -350 mv (dependant on source water) AnyWater Features Changes tap water into Alkaline Mineral Water Filters Water and reduces contaminants Convenient enough to take with you on business trips, camping or elsewhere Easy to assemble and clean Pour water into AnyWater and pour out Filtered, Alkaline Mineral water - no shaking or sitting for long periods. 1300 Refills per filter (approximately 90 days) Bottle holds 600 ML (20 Ounces) Somelite an important ingredient Somelite, also known as "coral sand," consists of natural coral grains that primarily consist of shells and skeletons of reef-building coral. Foraminifera, such as star sand, inhabiting the water near Okinawa, is also in the coral grains. These organisms ingest calcium and magnesium from the ocean. Consequently, coral sand is made up of approximately 95% calcium carbonate. Somelite also contains abundant amounts of calcium, magnesium and other minerals that promote optimal body health. Used as a water-purifying agent, the minerals in Somelite flow into the water, creating a balance of minerals. It also increases tap water alkalinity and removes odor. Because Somelite is a porous it also absorbs and removes heavy metals, foreign materials and more. What you receive - | *$139.95 |
 | AnyWater Mini Bio-Mineral Pot Produces Alkaline Mineral Water Brand: AnyWater Part Number: AnyWater POT The AnyWater Mini Bio Mineral Pot is a terrific portable solution for providing clean drinking water. On top of that, it increases the Alkalinity of your water through the use of all natural minerals. It is compact enough to use for travel, hiking, camping or as a supplement to your Water Ionizer. Can't yet afford a Water Ionizer? Use AnyWater, save the cost of bottled water until you have enough to acquire a machine. You can then use AnyWater for travel situations. Benefits Removes or Reduces contaminants such as chlorine, heavy metals, bacteria, insecticides, and other impurities. Increases Water Alkalinity - up to 9.5 pH obtainable (dependant on source water) Increases antioxidant potential (O.R.P.) up to -350 mv (dependant on source water) AnyWater Features Changes tap water into Alkaline Mineral Water Filters Water and reduces contaminants Convenient enough to take with you on business trips, camping or elsewhere Easy to assemble and clean Pour water into AnyWater and pour out Filtered, Alkaline Mineral water - no shaking or sitting for long periods. 1300 Refills per filter (approximately 90 days) Bottle holds 600 ML (20 Ounces) Somelite an important ingredient Somelite, also known as "coral sand," consists of natural coral grains that primarily consist of shells and skeletons of reef-building coral. Foraminifera, such as star sand, inhabiting the water near Okinawa, is also in the coral grains. These organisms ingest calcium and magnesium from the ocean. Consequently, coral sand is made up of approximately 95% calcium carbonate. Somelite also contains abundant amounts of calcium, magnesium and other minerals that promote optimal body health. Used as a water-purifying agent, the minerals in Somelite flow into the water, creating a balance of minerals. It also increases tap water alkalinity and removes odor. Because Somelite is a porous it also absorbs and removes heavy metals, foreign materials and more. What you receive - | *$79.95 |
 | AOK AlkaPod Portable Water Alkaline pH Enhancer - Ionizer Brand: AOK Model: AlkaPod Part Number: AOK_ALKAPOD AOK AlkaPod Portable Water Alkaline pH Enhancer Increases the pH level and filters your drinking water The AOK AlkaPod is portable, attractive, reusable and convenient for travel, camping or everyday use. The AlkaPod, while technically not a Water Ionizer, filters your water and uses natural elements to increase pH levels of your water. The AlkaPod uses 13 types of minerals in its filter. The Primary contents include - " Tourmaline Stone - introduces a natural form of Far Infrared Ionization (FIR) that helps to reduce surface tension and has a slight ionization effect " Zeolites - a rare group of minerals with a four-sided honeycomb structure and a natural, negative magnetic charge. Zeolites can absorb and retain heavy metals and toxins allowing safe passage out of the body without re-absorption " Maifanshi - found in valley streams that are rich in porphyritic pea gravel. Traditionally, maifanshi has been used as a general health medicine in Asia because or its ability to absorb toxins and supply many trace minerals. In the AOK, maifanshi helps to clean and mineralize and ionize the water. " Other Ingredients include Muyu Jade Clay, Nano-Silver Powder, and Kaolin earth Summary Benefits - " Filters your water of chlorine and other contaminants " Increase pH level of water - generally 1.0 to 2.0 level increases " Can help improve your systemic acid/alkaline balance " Provides an abundance of negative ions " Can help increase your hydration by reducing molecular cluster size " Produces low negative ORP (generally 200mv or higher) - providing powerful antioxidant potential " Provides natural far infrared ionization " Supplies active hydrogen ions - helps eliminate active oxygen (free radicals) " Produces smooth tasting water Specifications - " Attractive Stainless Steel construction " 7.87 inches (20cm) tall x 2.75 inches (7cm) diameter " Makes approximately 2.1 Pints (.5L) " Weight - Approximately 1 lb (empty) " Filter Life appr | *$139.00 |
| | Clear2O CWF101-FOX CLEAR 2O WATER FILTER Brand: Applica Part Number: CWF101-FOX CLEAR 2O WATER FILTER CWS100A/B | *$25.95 |
 | CLEAR 2O WATER FILTER 1pc 1pk WATER FILTER Brand: APPLICA CONSUMER PRODUCTS INC Model: CWF1012 Part Number: CWF1012 "APPLICA" WATER REPLACEMENT FILTER
Water Replacement Filter
For Clear 2O Pitcher.
Single Pack | *$6.99 |