 | Prince 3 Spool Control Valve, Model# HC-V-R21
Brand: Prince
Three spool control valve with float on one spool. Load checks each spool, to 25 GPM. Relief valve preset at 2000 PSI; adjusts from 1500-3000 PSI. Power beyond capacity. 3/4in. inlet/outlet ports, 1/2in. work ports. USA | *$319.99 |
 | Prince Energy Motor Spool Open Center Control Valve - 20 GPM, Model# RD-2575-M4-EDA1
Brand: Prince
Comes with motoring spool that will free wheel in neutral. Valve will detent in both directions. Relief valve preset at 1500 PSI; adjustable to 3000 PSI. 3/4in. inlet and outlet, 1/2in. working ports. Includes motoring spool. 20 GPM flow rate. 3-year limited warranty. U.S.A. | *$109.99 |
 | Prince PTO Tractor Pump 11.4 GPM, Model# HC-PTO-2A
Brand: Prince
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. | *$479.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 24in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 24, Closed Pin Center (in.): 34 1/4, Shaft Diameter (in.): 1 3/4 | *$289.99 |
 | Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 16in. Stroke, 1 1/2in. Shaft, Model# PMC-8316
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 16, Closed Pin Center (in.): 24, Shaft Diameter (in.): 1 1/2 | *$189.99 |
 | Prince Welded Tee Cylinder - 2500 PSI, 2 1/2in. Bore, 16in. Stroke, 1 3/8in. Shaft, Model# PMC-5416
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 2 1/2, Stroke Length (in.): 16, Closed Pin Center (in.): 24, Shaft Diameter (in.): 1 3/8 | *$179.99 |
 | Prince One Spool Control Valve, Model# HC-V-R22
Brand: Prince
4-way with floats; has balanced spools with select fit. Load checks to prevent load drops when shifting directions. Good for use on snowplows, dozers, loaders etc. Float valves allow blade or bracket to float along ground. Will accept power beyond plug conversion. Preset at 2000 PSI. Adjustable from 1500 to 3000 PSI. USA | *$159.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3 1/2in. Bore, 24in. Stroke, 1 1/2in. Shaft, Model# PMC-5524
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 24, Closed Pin Center (in.): 32, Shaft Diameter (in.): 1 1/2 | *$229.97 |
 | Prince Detent Valve, 3/4in. Port Size, Model# LS-3000-2
Brand: Prince
Factory pre-set at 1500 PSI; adjustable from 1000 to 3000 PSI. Spring centered. 3/4in. inlet/outlet and 3/4in. work ports. For use with 5in. and larger cylinders and 20 gallon pumps. Up to 25 gallons per minute. USA | *$99.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 3in. Bore, 20in. Stroke, 1 1/2in. Shaft, Model# PMC-8320
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 20, Closed Pin Center (in.): 28, Shaft Diameter (in.): 1 1/2 | *$219.99 |
 | Adjustable Flow Control Valve - 3/4in. Port Size
Brand: Prince
Controls the speed of hydraulic motors. Rated up to 3000 PSI. Rated flow 0-30 GPM. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A. | *$84.99 |
 | Prince Standard 4-Way Control Valve, Model# RD2575T4ESA1
Brand: Prince
Up to 20 GPM with 4 ports. Factory pre-set at 1500 PSI, has adjustable relief valve. For lower pressure, turn counter-clockwise. Adjustable from 1000 to 3000 PSI. Precision honed and plated, spools are hydraulically balanced. Spring centered. 3/4in. inlet/outlet ports, 1/2in. work ports. USA | *$99.99 |
 | Prince Standard Outlet End Plate, Model# SVE21
Brand: Prince
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. Power beyond plug capability. Use with double-acting cylinders. U.S.A. | *$39.99 |
| Prince Welded Tee Cylinder - 2500 PSI, 4in. Bore, 30in. Stroke, 2in. Shaft Size, Model# PMC-5630
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 4, Stroke Length (in.): 30, Closed Pin Center (in.): 39, Shaft Diameter (in.): 2 | *$309.99 |
| Prince Control Valve - 4-Way/3-Position Cylinder Spool, Model# SVW1BA1
Brand: Prince
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. For use with double-acting cylinders. U.S.A. Max. Flow (GPM): 12, Inlet Port (in.): 7/8-14 ORB, Outlet Port (in.): 7/8-14 ORB, Working Port (in.): 3/4-16 ORB,, Max. PSI: 3,000, Directional Control: 4 way, 3 position, Adjustable Release Pressure PSI: 1,500 - 3,000 | *$79.99 |
| Prince Two-Way Detent Valve, Model# LS-3010-2
Brand: Prince
For open center systems. Two-way detent; 3/4in. in/out 3/4in. work ports. Relief valve adjustable to 2750 PSI, preset at 2250 PSI, flow rating up to 25 GPM. Automatically kicks back to neutral when cylinder completes stroke. Built-in relief valve ports. Hydraulic balanced, hard chrome plated spool. Handle can be installed in up or down position. Detent release pressure adjustable from 600 to 2000 PSI. Warning: using a pressure detent in both directions can be dangerous. USA | *$84.99 |
 | Priority Flow Divider - 30 GPM Capacity
Brand: Prince
Divider has adjustable orifice. Rated up to 3000 PSI. Priority flow divider separates one input flow into two output flows. 0-30 GPM capacity. Priority flow is adjustable. One flow is constant and unaffected by input flow variations or load changes. The other port is an excess flow that can provide another circuit. 3/4in. ports. | *$94.99 |
 | Prince SP20 Series Hydraulic Gear Pump - 1.22 Cu. In., CCW, Model# SP20B20A9H4-L
Brand: Prince
Compact, lightweight gear pump is built with high-strength aluminum body housing and end covers. Delivers high efficiency and low noise. One-pc. hardened alloy steel gears and driveshaft. Operating pressures up to 3000 PSI. Ideal for material handling, aerial lifts, lawn and turf care, agriculture, construction and other applications. 3-year limited warranty. U.S.A. | *$219.99 |
 | 10 Ton Foot Air / Hydraulic Pump
Brand: Rafael Part Number: Lic-FAHP10
ulSpecifications: li Rated Pressure: 10,000 PSI li Air Pressure: 70 - 170 PSI li Stroke Length: 1" li Oil Flow at 100 PSI li Pressure: br 30 Cu.In/Min. at 0 PSI br 8 Cu.In/Min. at 10,000 PSI li Usable Oil Capacity: 42 Cu.In (690 cc) li Air Cunsumption: 10 CFM li Air Inlet: 1/4 NPT br Weight: 22.95 Lbs/ul | *$129.75 |
 | 10 Ton Hydraulic Porta Power
Brand: Raffael Tools Part Number: pp10
h3 PLEASE SELECT AN OPTION /h3 font class=r16 NOTE #1 :br This item may receive some damages during shipping. br If you decline the EXTRA PACKAGING option For $15.00, we will not cover for any replacement or cost of the Porta Power damaged.br /font Contents:br - Hydraulic Pumpbr - Jack Hosebr - 10 Ton Rambr - Spreader Rambr - Extension Tubesbr - Male Connetorbr - Flat Basebr - Wedge Headbr - Spreader Plunger Toebr - Spreader Ram Toebr - Flex Rubber Headbr - Serrated Saddlebr - Blow-Molded Casebr Weight: 70 Lbs br Updated on 9/3/2004 | *$157.33 |
 | 8 Ton Air/Hydraulic Long Ram Jack - Small Base
Brand: Raffael Tools Part Number: Lic AJ8
- Capacity 8 Tonbr - Replacement For 2 Ton Engine Hoistbr - Height: 24-1/5"br - Pick Height: 43-1/2"br - Stroke: 18.9"br - Ram Diameter: 1.4"br - Air Pressure Range: 0.8 - 0.95 Mpabr Weight: 41.25 Lbs | *$106.30 |
 | Pull Back Ram for 10 Ton Porta Power
Brand: Raffael Tools Part Number: pp10-pbr
Stroke: 130mmbr Material: Steelbr Capacity: 10 Tonbr Color: Red body with black hookbr Weight: 15 Lbs | *$64.53 |
 | 4 Ton Hydraulic Porta Power
Brand: Raffael Tools Part Number: pp4
h3 PLEASE SELECT AN OPTION /h3 font class=r16 NOTE #1 :br This item may receive some damages during shipping. br If you decline the EXTRA PACKAGING option For $10.00, we will not cover for any replacement or cost of the Porta Power damaged.br /font Contents:br - Hydraulic Pumpbr - Jack Hosebr - 4 Ton Rambr - Spreader Rambr - Extension Tubesbr - Male Connetorbr - Flat Basebr - Wedge Headbr - Spreader Plunger Toebr - Spreader Ram Toebr - Flex Rubber Headbr - Serrated Saddlebr - Blow-Molded Casebr Weight: 47 Lbs br Updated on 7/7/2005 | *$98.07 |
 | Pull Back Ram for 10 Ton Porta Power - Heavy Duty
Brand: Raffael Tools Part Number: pp10-pbr-hd
li Stroke: 6" li Material: Steel li Capacity: 10 Ton br Weight: 19.95 Lbs | *$172.09 |
 | RapidAir Union Elbow Fitting - 1/2in., Model# 50300
Brand: RapidAir
RapidAir union elbow fitting (along with other RapidAir components, sold separately) enables you to expand your compressed air piping system, putting air lines exactly where you want them. Simply push air compressor tubing into the fitting until seated. Tubing can be removed by pushing on release button. Molded mounting hole makes for clean installation appearance. U.S.A. Fitting Size (in.): 1/2, Degree of Angle ( deg ): 90 | *$3.95 |
 | Lion Cross-Tube Welded Hydraulic Cylinder - 3000 PSI, 4in. Bore, 8in. Stroke, 2in. Shaft, Model# 40WX08-200
Brand: Red Lion
Ideal for high- or low-pressure industrial or construction applications. Cross-tube welded cylinder operates at 3000 PSI with a 6000 PSI proof pressure rating. Ports are 3/4-16 UNF ORB and are 90deg to pins. Cap and cross tube ends are durable steel cast components made to withstand continuous high loads. Precision finished skived and burnished heavy wall steel tubing for extended seal and cylinder life. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 8, Shaft Diameter (in.): 2 | *$239.99 |
| Red Lion Cross-Tube Welded Hydraulic Cylinder - 3000 PSI, 3in. Bore, 8in. Stroke, 1 1/2in. Shaft, Model# 30WX08-150
Brand: Red Lion
Ideal for high- or low-pressure industrial or construction applications. Cross-tube welded cylinder operates at 3000 PSI with a 6000 PSI proof pressure rating. Ports are 3/4-16 UNF ORB and are 90deg to pins. Cap and cross tube ends are durable steel cast components made to withstand continuous high loads. Precision finished skived and burnished heavy wall steel tubing for extended seal and cylinder life. Max. PSI: 3,000, Bore Diameter (in.): 3, Stroke Length (in.): 8, Shaft Diameter (in.): 1 1/2 | *$169.99 |
 | Red Lion Welded Cylinder - 2500 PSI, 14in. Stroke, Model# 25WC14-150
Brand: Red Lion
Excellent for loaders, engine hoists and small boom conveyors. 1 12in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$159.99 |
 | Red Lion Welded Double-Acting Cylinder - 2500 PSI, 36in. Stroke, Model# 25WC36-150
Brand: Red Lion
Excellent for loaders, engine hoists and small boom conveyors. 1 1/2in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$229.99 |
| Lion Cross-Tube Welded Hydraulic Cylinder - 3000 PSI, 2in. Bore, 8in. Stroke, 1 1/16in. Shaft, Model# 20WX08-112
Brand: Red Lion
Ideal for high- or low-pressure industrial or construction applications. Cross-tube welded cylinder operates at 3000 PSI with a 6000 PSI proof pressure rating. Ports are 3/4-16 UNF ORB and are 90deg to pins. Cap and cross tube ends are durable steel cast components made to withstand continuous high loads. Precision finished skived and burnished heavy wall steel tubing for extended seal and cylinder life. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 8, Shaft Diameter (in.): 1 1/16 | *$149.99 |
 | Red Lion Welded Cylinder - 2500 PSI, 30in. Stroke, Model# 25WC30-150
Brand: Red Lion
Excellent for loaders, engine hoists and small boom conveyors. 1 12in. chrome rod, crown piston seals with wear ring, hallite rod seals, cross tube base end and threaded end. Complete with ductile threaded rod clevis, one pin and retaining clips. | *$219.99 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.128, O = 1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 090-021-111 | *$199.24 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.441, O = 5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 090-022-222 | *$235.49 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.68, O = 1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 090-023-333 | *$277.62 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.998, O = 1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 090-021-114 | *$219.89 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 2.441, O = 5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 090-012-221 | *$225.35 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 2.68, O = 1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 090-013-332 | *$279.41 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 2.998, O = 1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 090-011-113 | *$224.71 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 3.651, O = 5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 090-012-224 | *$277.07 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity = 1,650 lbs. (1 Each)
Brand: Reid Supply Company Part Number: 040-1-1650 | *$233.52 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity = 2,500 lbs. (1 Each)
Brand: Reid Supply Company Part Number: 040-1-2500 | *$217.34 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity = 5,000 lbs. (1 Each)
Brand: Reid Supply Company Part Number: 040-1-5000 | *$248.68 |
 | De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 1.929, B = .709, C = M6 (1 Each)
Brand: Reid Supply Company Part Number: 031-S-475
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$33.09 |
| De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 3.268, B = .866, C = M10 (1 Each)
Brand: Reid Supply Company Part Number: 031-S-2400
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$48.09 |
| De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 3.959, B = .709, C = None (1 Each)
Brand: Reid Supply Company Part Number: 031-L-475
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$46.96 |
| De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 7.226, B = .866, C = None (1 Each)
Brand: Reid Supply Company Part Number: 031-L-2400
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$75.59 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=1.750-16, K=1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 010-021-111 | *$139.36 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=1.875-16, K=5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 010-022-225 | *$171.77 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=2.500-16, K=1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 010-023-335 | *$221.72 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=2.500-16, K=1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 010-023-333 | *$190.66 |
|
