 | Heavy-Duty Half Coupling - 1 1/4in. Size
Brand: Northern Tool Equipment
Use a flex coupling to direct-mount your engine to pump. Oil-resistant synthetic rubber inserts are used between the coupling halves to provide an equalized cushioned drive. When ordering, get one side to fit the motor and the other side to fit the pump shaft dia. Order two halves plus insert for complete coupling. When mounting, do not pound on the end of your pump shaft. U.S.A. Shaft Diameter (in.): LO99 HUB 1 1/4, Fits Models: LO99, L100, L110, Max. HP: 23, Max. RPM: 3,600, Material Type: Synthetic Rubber, Keyway (in.): 1/4 x 1/8 | *$29.99 |
 | Metro Machine Check Valve, 3/4in. Port Size, 3000 PSI
Brand: Northern Tool Equipment
Will hold pressure in one direction and free flow in other. One end male pipe thread, other end female pipe thread. Free flow direction, male port to female port. Max pressure 3000 PSI. | *$22.99 |
 | Hydraulic Cylinder Breather Cap - 1/2in. Dia.
Brand: Northern Tool Equipment
Converts double-acting cylinders to single action. 1/2 in. in size. | *$4.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 10.7 GPM, 4500 PSI, 3-Position, Double Solenoid, Tandem Center Spool, 12 Volt DC Solenoids, Model# SWH-G02-C3-D12-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with P and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT Ports. | *$109.99 |
| Northman Fluid Power Hydraulic Directional Control Valve - 10.7 GPM, 4500 PSI, 3-Position, Double Solenoid, Tandem Center Spool, 120 Volt AC Solenoids, Model# SWH-G02-C6-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with P and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT Ports. | *$119.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 16.8 GPM, 4500 PSI, 2-Position, Spring Offset, 120 Volt AC Solenoid, Model# SWH-G02-B2-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder. As a single-solenoid valve, it will remain in its home position until shifted electrically, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT Ports. | *$99.99 |
| Northman Fluid Power Hydraulic Directional Control Valve - 16.8 GPM, 4500 PSI, 3-Position, Double Solenoid, Closed Center spool, 120 Volt AC Solenoid, Model# SWH-G02-C2-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home all-ports blocked position until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT Ports | *$109.99 |
| Northman Fluid Power Hydraulic Directional Control Valve - 16.8 GPM, 4500 PSI, 3-Position, Double Solenoid, Open Center Spool, 12 Volt DC Solenoids, Model# SWH-G02-C3-D12-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with all-ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT ports. | *$109.99 |
| Northman Fluid Power Hydraulic Directional Control Valve - 16.8 GPM, 4500 PSI, 3-Position, Double Solenoid, Open Center Spool, 120 Volt AC Solenoid, Model# SWH-G02-C3-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with all-ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT Ports. | *$109.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 19.8 GPM, 4500 PSI, 3-Position, Double Solenoid, Tandem Center Spool, 120 Volt AC Solenoids, Model# SWH-G03-C6-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with P and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. | *$139.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 25 GPM, 3000 PSI, Manual, 3/8in. NPT Ports, Model# HDT033C2
Brand: Northman Fluid Power
This Northman industrial 4-way valve is commonly used to extend and retract a double-acting hydraulic cylinder. It is actuated manually with the hand-lever. As a spring-centered valve, it will remain in its home all-ports blocked position until shifted to one of 2 positions to either extend or retract a cylinder, returning to home when the lever is released. | *$104.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 26.4 GPM, 4500 PSI, 2-Position, Spring Offset, 120 Volt AC Solenoid, Model# SWH-G03-B2-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder. As a single-solenoid valve, it will remain in its home position until shifted electrically, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplates 203331 (3/8), 203341 (1/2) and 203361 (3/4). | *$124.99 |
| Northman Fluid Power Hydraulic Directional Control Valve - 26.4 GPM, 4500 PSI, 3-Position, Double Solenoid, Closed Center Spool, 120 Volt AC Solenoids, Model# SWH-G03-C2-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home all-ports blocked position until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. | *$139.99 |
| Northman Fluid Power Hydraulic Directional Control Valve - 26.4 GPM, 4500 PSI, 3-Position, Double Solenoid, Float Center Spool, 12 Volt DC Solenoids, Model# SWH-G03-C4-D12-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with A, B and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. | *$139.99 |
| Northman Fluid Power Hydraulic Directional Control Valve - 26.4 GPM, 4500 PSI, 3-Position, Double Solenoid, Open Center Spool, 120 Volt AC Solenoids, Model# SWH-G03-C3-A120-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with all-ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. | *$139.99 |
 | Northman Fluid Power In-Line Hydraulic Check Valve - 17.1 GPM, 3000 PSI, 1/2in. NPT Ports, Model# CIT0405
Brand: Northman Fluid Power
This Northman in-line check valve is designed to allow free flow of oil in a hydraulic system in one direction and block flow in the reverse direction. | *$24.99 |
 | Northman Fluid Power In-Line Hydraulic Check Valve - 30.4 GPM, 3000 PSI, 3/4in. NPT Ports, Model# CIT0605
Brand: Northman Fluid Power
This Northman in-line check valve is designed to allow free flow of oil in a hydraulic system in one direction and block flow in the reverse direction. | *$29.99 |
 | Northman Fluid Power In-Line Hydraulic Flow Control Valve - 8 GPM, 3000 PSI, 3/8in. NPT Ports, Model# TVT03
Brand: Northman Fluid Power
This Northman in-line adjustable flow control needle valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. | *$36.99 |
 | Northman Fluid Power In-Line Hydraulic Flow Control Valve with Reverse Free Flow - 8 GPM, 3000 PSI, 3/8in. NPT Ports, Model# TCVT03
Brand: Northman Fluid Power
This Northman in-line adjustable flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is full free flow over a check valve. | *$44.99 |
 | Northman Fluid Power In-Line Hydraulic Needle Valve - 20 GPM, 3000 PSI, 3/4in. NPT Ports, Model# TVT06
Brand: Northman Fluid Power
This Northman in-line adjustable needle valve is designed to restrict the flow of oil in a hydraulic system in order to control the speed of a cylinder or motor. | *$64.99 |
 | Northman Fluid Power In-Line Hydraulic Relief Valve - 50 GPM, 100-1000 PSI Adjustable, 3550 PSI, 3/4in. NPT Ports, Model# RFT061
Brand: Northman Fluid Power
This Northman adjustable relief valve is designed to limit the operating pressure in a hydraulic system to a maximum set pressure. The valve may be connected into the pressure line so that system pressure flows through, or it may be teed off the pressure line with one of the pressure ports plugged. When the system reaches the maximum desired setting, the internal piston moves to smoothly relieve pressure to tank, maintaining stable pressure control and repeatability. Ports are also provided for a gauge and for remote pressure control. | *$89.99 |
 | Northman Fluid Power In-Line Hydraulic Relief Valve - 50 GPM, 1000-3550 PSI Adjustable, 3550 PSI, 3/4in. NPT Ports, Model# RFT063
Brand: Northman Fluid Power
This Northman adjustable relief valve is designed to limit the operating pressure in a hydraulic system to a maximum set pressure. The valve may be connected into the pressure line so that system pressure flows through, or it may be teed off the pressure line with one of the pressure ports plugged. When the system reaches the maximum desired setting, the internal piston moves to smoothly relieve pressure to tank, maintaining stable pressure control and repeatability. Ports are also provided for a gauge and for remote pressure control. | *$89.99 |
 | Northman Fluid Power In-Line Hydraulic Relief Valve - 50 GPM, 500-2000 PSI Adjustable, 3550 PSI, 3/4in. NPT Ports, Model# RFT062
Brand: Northman Fluid Power
This Northman adjustable relief valve is designed to limit the operating pressure in a hydraulic system to a maximum set pressure. The valve may be connected into the pressure line so that system pressure flows through, or it may be teed off the pressure line with one of the pressure ports plugged. When the system reaches the maximum desired setting, the internal piston moves to smoothly relieve pressure to tank, maintaining stable pressure control and repeatability. Ports are also provided for a gauge and for remote pressure control. | *$89.99 |
 | Northman Fluid Power Modular Hydraulic Flow Control Valve - 20 GPM, 3000 PSI, Ports A B, Reverse Free Flow, Model# MT03
Brand: Northman Fluid Power
This Northman flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is a free flow over a check valve. Valve mounts as a modular unit between a D05 size directional control valve and the subplate. Contains 2 separate pilot-operated check valves-one each on A cylinder port and B cylinder port. Allows metered flow adjustment in the cylinder ports as the flow exits, controlling the speed of the cylinder. As separate valves, speed may be controlled independently for the extend and retract operations. Requires longer than standard bolt kit to mount this flow control in valve stack. | *$109.99 |
 | Northman Fluid Power Modular Hydraulic Flow Control Valve - 9.3 GPM, 3000 PSI, Ports A B, Reverse Free Flow, Model# MT02
Brand: Northman Fluid Power
This Northman flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is a free flow over a check valve. Valve mounts as a modular unit between a D03 size directional control valve and the subplate. Contains 2 separate pilot-operated check valves-one each on A cylinder port and B cylinder port. Allows metered flow adjustment in the cylinder ports as the flow exits, controlling the speed of the cylinder. As separate valves, speed may be controlled independently for the extend and retract operations. Requires longer than standard bolt kit to mount this flow control in valve stack. | *$79.99 |
 | Northman Fluid Power Modular Pilot-Operated Check Valve - 20 GPM, 3000 PSI, Ports A B, Model# MPC03
Brand: Northman Fluid Power
Northman pilot-operated check valve is designed to block the flow of oil in a hydraulic system to hold the position of a cylinder when the directional control valve is shifted to the neutral center position. Flow is restored by a pilot pressure signal releasing the check valve when the directional control valve is extending or retracting the cylinder. Valve mounts as a modular unit between a D03 size directional control valve and the subplate. Contains 2 separate pilot-operated check valves-one each on A cylinder port and B cylinder port. Requires longer than standard bolt kit to mount this flow control in valve stack. | *$109.99 |
 | Northman Fluid Power Modular Pilot-Operated Check Valve - 9.3 GPM, 3000 PSI, Ports A B, Model# MPC02
Brand: Northman Fluid Power
Northman pilot-operated check valve is designed to block the flow of oil in a hydraulic system to hold the position of a cylinder when the directional control valve is shifted to the neutral center position. Flow is restored by a pilot pressure signal releasing the check valve when the directional control valve is extending or retracting the cylinder. Valve mounts as a modular unit between a D03 size directional control valve and the subplate. Contains 2 separate pilot-operated check valves-one each on A cylinder port and B cylinder port. Requires longer than standard bolt kit to mount this flow control in valve stack. | *$79.99 |
 | Northman Fluid Power Modular Valve Stack Bolt Kit - To Mount 1 NFPA D03 Valve 1 NFPA D03 Modular Valve, Model# MBK021
Brand: Northman Fluid Power
This Northman bolt kit includes 4 threaded bolts and 4 nuts to mount a stack of one directional control valve and one modular valve. Designed for the NFPA D03 size valve series. | *$19.99 |
 | Northman Fluid Power Modular Valve Stack Bolt Kit - To Mount One NFPA D03 Valve 2 NFPA D03 Modular Valves, Model# MBK022
Brand: Northman Fluid Power
This Northman bolt kit includes 4 threaded bolts and 4 nuts to mount a stack of one directional control valve and two modular valves. Designed for the NFPA D03 size valve series. | *$21.99 |
 | Northman Fluid Power Modular Valve Stack Bolt Kit - To Mount One NFPA D05 Valve 1 NFPA D05 Modular Valve, Model# MBK031
Brand: Northman Fluid Power
This Northman bolt kit includes 4 threaded bolts and 4 nuts to mount a stack of one directional control valve and one modular valve. Designed for the NFPA D05 size valve series. | *$21.99 |
 | Northman Fluid Power Modular Valve Stack Bolt Kit - To Mount One NFPA D05 Valve 2 NFPA D05 Modular Valves, Model# MBK032
Brand: Northman Fluid Power
This Northman bolt kit includes 4 threaded bolts and 4 nuts to mount a stack of one directional control valve and two modular valves. Designed for the NFPA D05 size valve series. | *$24.99 |
 | Northman Single-Station Subplate - NFPA D03 Pattern, 1/4in. NPT Side Ports, Model# M02-02-S-2
Brand: Northman Fluid Power
This single-station subplate for mounting an industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern. It accepts Northern Tool valves in the 20130* and 20230* Series. The 1/4in. NPT female ports are side mounted for the Pressure, Tank, A and B ports. | *$49.99 |
 | Northman Single-Station Subplate - NFPA D03 Pattern, 3/8in. NPT Side Ports, Model# M02-03-S-2
Brand: Northman Fluid Power
This single-station subplate for mounting an industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern. It accepts Northern Tool valves in the 20130* and 20230* Series. The 3/8in. NPT female ports are side mounted for the Pressure, Tank, A and B ports. | *$49.99 |
 | Northman Single-Station Subplate - NFPA D05 Pattern, 3/4in. NPT Side Ports, Model# M03-06-S-2
Brand: Northman Fluid Power
This single-station subplate for mounting an industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern. It accepts Northern Tool valves in the 20150* and 20250* Series. The 3/4in. NPT female ports are side mounted for the Pressure, Tank, A and B ports. | *$54.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 26.4 GPM, 4500 PSI, 2-Position, Spring Offset, 12 Volt DC Solenoid, Model# SWH-G03-B2-D12-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder. As a single-solenoid valve, it will remain in its home position until shifted electrically, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. | *$129.99 |
| Northman Fluid Power Hydraulic Directional Control Valve - 16.8 GPM, 4500 PSI, 3-Position, Double Solenoid, Closed Center Spool, 12 Volt DC Solenoids, Model# SWH-G02-C2-D12-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D03 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home all-ports blocked position until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203221 with 1/4in. NPT ports or 203231 with 3/8in. NPT ports. | *$109.99 |
 | Northman Single-Station Subplate - NFPA D05 Pattern, 1/2in. NPT Side Ports, Model# M03-04-S-2
Brand: Northman Fluid Power
This single-station subplate for mounting an industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern. It accepts Northern Tool valves in the 20150* and 20250* Series. The 1/2in. NPT female ports are side mounted for the Pressure, Tank, A and B ports. | *$49.99 |
| Northman Fluid Power Hydraulic Directional Control Valve - 26.4 GPM, 4500 PSI, 3-Position, Double Solenoid, Open Center Spool, 12 Volt DC Solenoids, Model# SWH-G03-C3-D12-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with all-ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. | *$139.99 |
| Northman Fluid Power Hydraulic Directional Control Valve - 19.8 GPM, 4500 PSI, 3-Position, Double Solenoid, Tandem Center Spool, 12 Volt DC Solenoids, Model# SWH-G03-C6-D12-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home position with P and T ports commonly connected until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. GPM: 19.8, Max. PSI: 4,500, Directional Control: 4 way, 3 position, Volts: 12, Indicator Light: Yes | *$139.99 |
| Northman Fluid Power Hydraulic Directional Control Valve - 26.4 GPM, 4500 PSI, 3-Position, Double Solenoid, Closed Center Spool, 12 Volt DC Solenoids, Model# SWH-G03-C2-D12-10
Brand: Northman Fluid Power
This industrial hydraulic directional control valve conforms to the National Fluid Power Association (NFPA) D05 mounting pattern for subplate or manifold mounting. As a four-way valve, it is commonly used to extend and retract a double-acting hydraulic cylinder or to control a rotary hydraulic motor. As a spring-centered valve, it will remain in its home all-ports blocked position until shifted electrically to one of two positions to either extend or retract a cylinder, returning to home when the power is removed. Its molded coils are moisture and dirt resistant. Indicating signal lights, manual override, bolt kit and electrical junction box are standard. The valve mounts on Northern Tool Subplate 203321 with 3/8in. NPT ports or 203331 with 1/2in. NPT ports. | *$139.99 |
 | Northman Fluid Power Hydraulic Directional Control Valve - 25 GPM, 3000 PSI, 3/8in. NPT Ports, Model# HDT032B2
Brand: Northman Fluid Power
This Northman industrial 4-way valve is commonly used to extend and retract a double-acting hydraulic cylinder. It is actuated manually with the hand-lever. As a spring-offset valve, it will remain in its home position until shifted and held, returning to home when the lever is released. | *$104.99 |
 | Northman Fluid Power In-Line Hydraulic Flow Control Valve with Reverse Free Flow - 20 GPM, 3000 PSI, 3/4in. NPT Ports, Model# TCVT06
Brand: Northman Fluid Power
This Northman in-line adjustable flow control valve is designed to restrict the flow of oil in a hydraulic system to control the speed of a cylinder or motor. The flow in one direction is metered as adjusted. The flow in the opposite direction is full free flow over a check valve. | *$79.99 |
 | NorthStar Steel Hydraulic Oil Tank, 4.8 gallon
Brand: NorthStar
Features sturdy 12-gauge steel welded construction. Welded-on mounting brackets. Includes clip-on style breather cap. Suction strainer Item# 4011 fits oil tank Item# 4050 (strainer not included). Capacity (gal.): 4.8, Suction Port (in.): 11/2, Return Port (in.): 3/4, Mount Type: 4 bolt, Material Type: Steel, Dimensions L x W x H (in.): 15 x 9 x 8 | *$79.99 |
| NorthStar Steel Hydraulic Oil Tank, 2.8 Gallon
Brand: NorthStar
Features sturdy 12-gauge steel welded construction. Welded-on mounting brackets. Includes clip-on style breather cap. Suction strainer Item# 4011 fits oil tank Item# 4049 (strainer not included). Capacity (gal.): 2.8, Suction Port (in.): 1 1/2, Return Port (in.): 3/4, Mount Type: 4 bolt, Material Type: Steel, Dimensions L x W x H (in.): 9 x 8 x 8 | *$59.99 |
| NorthStar Steel Hydraulic Oil Tank - 12 Gallon
Brand: NorthStar
Features sturdy 12-gauge steel welded construction. Welded-on mounting brackets. Includes clip-on style breather cap. Suction strainer Item# 4010 fits oil tank Item# 4053 (strainer not included). Capacity (gal.): 12, Suction Port (in.): 2, Return Port (in.): 1, Mount Type: 2 bolt, Material Type: Steel, Dimensions L x W x H (in.): 18 1/4 x 11 1/4 x 14 | *$109.99 |
| NorthStar Steel Hydraulic Oil Tank - 7 Gallon
Brand: NorthStar
Features sturdy 12-gauge steel welded construction. Welded-on mounting brackets. Includes clip-on style breather cap. Suction strainer Item# 4010 fits oil tank Item# 4051 (strainer not included). Capacity (gal.): 7, Suction Port (in.): 2, Return Port (in.): 1, Mount Type: 2 bolt, Material Type: Steel, Dimensions L x W x H (in.): 16 x 10 x 10 1/2 | *$89.99 |
| NorthStar Steel Hydraulic Oil Tank - 10 Gallon
Brand: NorthStar
Features sturdy 12-gauge steel welded construction. Welded-on mounting brackets. Includes clip-on style breather cap. Suction strainer Item# 4010 fits oil tank Item# 4052 (strainer not included). Capacity (gal.): 10, Suction Port (in.): 2, Return Port (in.): 1, Mount Type: 2 bolt, Material Type: Steel, Dimensions L x W x H (in.): 17 3/4 x 11 x 12 | *$99.99 |
 | NOSHOK 2.5" Dial 1/4" NPT -30 inHg to 30 PSI Liquid Filled Pressure Gauge
Brand: NOSHOK Part Number: 25-901-30/30-psi/kg/cm2
NOSHOK Liquid Filled Gauges are high quality gauges that incorporate unique design features aimed at extended service life and reliability. They are used worldwide where pulsation, vibration and shock are present and the media is not corrosive to brass. | *$7.00 |
| NOSHOK 2.5" Dial 1/4" NPT -30 inHg VAC/BAR Liquid Filled Pressure Gauge
Brand: NOSHOK Part Number: 25-901-30-vac/bar
NOSHOK Liquid Filled Gauges are high quality gauges that incorporate unique design features aimed at extended service life and reliability. They are used worldwide where pulsation, vibration and shock are present and the media is not corrosive to brass. | *$7.00 |
| NOSHOK 2.5" Dial 1/4" NPT 0-100 PSI Liquid Filled Pressure Gauge
Brand: NOSHOK Part Number: 25-901-100-psi/kg/cm2
NOSHOK Liquid Filled Gauges are high quality gauges that incorporate unique design features aimed at extended service life and reliability. They are used worldwide where pulsation, vibration and shock are present and the media is not corrosive to brass. | *$7.00 |
|
