 | C.R. LAURENCE 2605244 CRL 3 x 24 Replacement Felt Ring
Brand: C.R. Laurence Part Number: 2605244
Fits the 37P0L Glass Polisher and Scratch Remover This CRL Replacement Wheel / Ring works with the 37P0L Polisher and Scratch Remover. | *$834.69 |
 | C.R. LAURENCE 2605306 CRL 6 x 1/2 Replacement White Felt Polishing Wheel
Brand: C.R. Laurence Part Number: 2605306
Used to Remove Scratches and Polish Hand Bevels and Edges This CRL Replacement Wheel/Ring is a white mirror grade medium hard wheel. 100% pure wool. Carefully selected to assure uniform density. For portable polishers and engraving lathes. Works with the YP85 Polisher and Scratch Remover. Minimum order is one each. Hole: 1/2 in (12.7 mm) | *$29.59 |
| C.R. LAURENCE 2605372 CRL 7 x 2 Replacement White Felt Polishing Wheel
Brand: C.R. Laurence Part Number: 2605372
Used to Remove Scratches and Polish Hand Bevels and Edges This CRL Replacement Wheel/Ring is a white mirror grade medium hard wheel. 100% pure wool. Carefully selected to assure uniform density. For portable polishers and engraving lathes. Works with the YP85 Polisher and Scratch Remover. Minimum order is one each. Hole: 1 in (25.4 mm) | *$126.25 |
| C.R. LAURENCE 2605373 CRL 7 x 3 Replacement White Felt Polishing Wheel
Brand: C.R. Laurence Part Number: 2605373
Used to Remove Scratches and Polish Hand Bevels and Edges This CRL Replacement Wheel/Ring is a white mirror grade medium hard wheel. 100% pure wool. Carefully selected to assure uniform density. For portable polishers and engraving lathes. Works with the YP85 Polisher and Scratch Remover. Minimum order is one each. Hole: 1 in (25.4 mm) | *$229.20 |
 | C.R. LAURENCE 2620099 CRL 3M Replacement Pad
Brand: C.R. Laurence Part Number: 2620099
For the Somaca 4" x 106" Belt Machine This part is made to fit the Somaca 4" x 106" Upright Belt Sander. | *$76.76 |
 | C.R. LAURENCE 2621004 CRL/Somaca 48 Glass Rest Extension Arm
Brand: C.R. Laurence Part Number: 2621004
One Piece 48" Extension Arm The 106's rubber roller platen work surface can be increased by the addition of this extension arm. The glass support bar becomes long enough to work the largest pieces of glass a single operator can safely handle. The 48 inch arm can easily replace the existing, standard 24 inch Somaca 106 glass platen rest bar. No hole drilling is required. | *$187.78 |
 | C.R. LAURENCE 2621043 CRL/Somaca Eccentric and Pulley Assembly
Brand: C.R. Laurence Part Number: 2621043
Most Models of 106E and G Sanders This Replacement Eccentric and Pulley Assembly controls belt tension on Somaca 106E and G belt machines, and is a conversion for older models, except 106-FB 12RP. | *$669.67 |
 | C.R. LAURENCE 2621056 CRL Nozzle Holder for Somaca 106 Machines
Brand: C.R. Laurence Part Number: 2621056
Fits All 106 Machines This Replacement Nozzle and Holder fit all Somaca 106 Belt Machines. | *$27.43 |
 | C.R. LAURENCE 2621060 CRL Solenoid Unit for All 110V Somaca Belt Machines
Brand: C.R. Laurence Part Number: 2621060
Fits All Belt Machines Since 1940 This Replacement Solenoid fits all Somaca 110V Belt Machines since 1940. | *$117.65 |
 | C.R. LAURENCE 2621066 CRL Upper Pulley for 106FB and 106E G Somaca Sanders
Brand: C.R. Laurence Part Number: 2621066
Series 106 Sanders This Replacement Upper Pulley fits 106FB and 106E G Models of 106 Series Sanders. | *$151.78 |
 | C.R. LAURENCE 2622000 CRL/Somaca 106 Wet Abrasive Belt Machine With Roller Platen - 110 Volt
Brand: C.R. Laurence Part Number: 2622000
Rough Grinding, Smoothing and Polishing Edges of Glass There are some quality products that never really get old – they just get better as the years pass. This is the case for the world famous Somaca 106" Belt Machine. It's a machine that has been the workhorse and mainstay for most glass shops in the U.S., Canada and throughout the world. Since 1932, glassworkers have learned to rely on the 106" to fulfill their glass grinding and polishing requirements. Reliability, versatility and durability are the words that best describe this renowned machine. A machine that has been made with pride by American craftsmen for over 70 years, using American-made components. Height: 72 in (1829 mm) Depth: 23 in (584 mm) Width: 24 in (610 mm) | *$2,719.71 |
 | C.R. LAURENCE 2622011 CRL/Somaca Replacement Rubber Roller
Brand: C.R. Laurence Part Number: 2622011
For 106C, E G Machines 1968 to Present Somaca/CRL Replacement Part for Somaca 106C, E G. Roller fits all belt sanders with a 1" platen shaft (roller only). 1968 to present. | *$273.40 |
 | C.R. LAURENCE 2622016 CRL 3 Replacement Roller for 106-FB 12-RP Upright Belt Sander
Brand: C.R. Laurence Part Number: 2622016
For the Somaca 4" x 106" Belt Machine This part is made to fit the Somaca 4" x 106" Upright Belt Sander. | *$22.64 |
 | C.R. LAURENCE 2622024 CRL/Somaca Pair of Glass Rest Extension Arms
Brand: C.R. Laurence Part Number: 2622024
Each Arm is 24" The 106's rubber roller platen work surface can be increased from two to six feet (72 inches) by the addition of two special extension arms. The glass support bar becomes long enough to work the largest pieces of glass a single operator can safely handle. The two 24 inch arms can be easily attached to any existing, standard 24 inch Somaca 106 glass platen rest bar. No hole drilling is required. | *$355.46 |
 | C.R. LAURENCE 2622028 CRL Upper / Lower Pulley for Specific Model Somaca Sanders
Brand: C.R. Laurence Part Number: 2622028
Upper Pulley for Model 106C, 1968 Thru 1983 This Replacement Pulley is a Upper Pulley for Model 106C 1968 Thru 1983, and Lower Pulley for All Models of 106 Series Sanders. | *$160.09 |
 | C.R. LAURENCE 2622300 CRL/Somaca 106 Wet Abrasive Belt Machine With 3M Platen
Brand: C.R. Laurence Part Number: 2622300
Rough Grinding, Smoothing and Polishing Edges of Glass For Use with 4" x 106" Belts Added Operator Protection Standard Safety Shield Operates on 110 Volts AC There are some quality products that never really get old they just get better as the years pass. This is the case for the world famous Somaca 106" Belt Machine. It's a machine that has been the workhorse and mainstay for most glass shops in the U.S., Canada and throughout the world. Width: 24 in (610 mm) Depth: 23 in (584 mm) Height: 72 in (1829 mm) Additional Product Information: Since 1932, glassworkers have learned to rely on the 106" to fulfill their glass grinding and polishing requirements. Reliability, versatility and durability are the words that best describe this renowned machine. A machine that has been made with pride by American craftsmen for over 70 years, using American-made components. Major Features of the 106 SPECIFICATIONS 106" Abrasive Belt Machine Abrasive Belts This machine uses standard 4" x 106" abrasive belts. One 120 grit belt (CRL4X106120X), one pair of safety glasses, and one approved respirator, (ES8710), are furnished with each machine. A safety shield is mounted to the hood. Motor 1HP, 110/220 volt, 60 cycle, single phase, 3450 RPM, capacitor-type wired to toggle switch, cord and plug. All machines are wired for 110 volts unless otherwise specified. Pulleys (Idler and Driven) 5" diameter, cast iron, machine trued and balanced. Belt Tension Device Eccentric type with locking handle, and control knob for tracking. Platens Available (Choice of One) A. Rubber Contact Platen with 24" long glass rest and five 3" dia. wheels. (2625587). B. 3M Flat Metal Cushioned Platen (optional). (2626674). C. 3M Replacement Pad. (2620099). D. Double Roller (optional). (2628442). Bearings Sealed standard ball bearings throughout in cast iron housings. Coolant System Water line with solenoid | *$2,545.51 |
 | C.R. LAURENCE 2623518 CRL 10 Glastar Tri-Star Saw and Blade
Brand: C.R. Laurence Part Number: 2623518
Three Functions In One Tool This CRL Glastar Tri-Star 8" Glass Grinder and 10" Saw is a versatile tool that enables you to do three jobs. On the left side you can mount a diamond glass grinding wheel up to eight inches (203.2 millimeters) in diameter. On the right side, you can mount an 8 inch (203.2 millimeter) grinding disc or felt polishing wheel. And for glass cutting, a 10 inch (254 millimeter) saw blade can be mounted, along with the table attachment. The machine is furnished with four miter guides. Wheels, discs, blades and saw table must be ordered separately. DIMENSIONS: 20 L x 12 D x 10 H inches (508 x 304.8 x 254 millimeters) F.O.B : Los Angeles, Ca. | *$164.14 |
 | C.R. LAURENCE 2625587 CRL Rubber Contact Platen With 24 Long Glass Rest and Rollers
Brand: C.R. Laurence Part Number: 2625587
For the Somaca 4" x 106" Belt Machine This part is made to fit the Somaca 4" x 106" Upright Belt Sander. | *$741.71 |
| C.R. LAURENCE 2626674 CRL 3M Flat Metal Cushioned Platen
Brand: C.R. Laurence Part Number: 2626674
For the Somaca 4" x 106" Belt Machine This part is made to fit the Somaca 4" x 106" Upright Belt Sander. | *$255.47 |
 | C.R. LAURENCE 2628442 CRL Optional Double Roller for Upright Belt Sander
Brand: C.R. Laurence Part Number: 2628442
For the Somaca 4" x 106" Belt Machine This part is made to fit the Somaca 4" x 106" Upright Belt Sander. | *$992.72 |
 | C.R. LAURENCE 30010500 CRL/Somaca Spray Nozzle Holder for BM106G Machine
Brand: C.R. Laurence Part Number: 30010500
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 33 Quantity Required Per Machine: 1 | *$29.27 |
 | C.R. LAURENCE 30016600 CRL/Somaca Lower Pulley for BM106G Machine
Brand: C.R. Laurence Part Number: 30016600
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 58 Quantity Required Per Machine: 1 | *$146.76 |
 | C.R. LAURENCE 30017000 CRL/Somaca Closed Cover Plate for BM106G Machine
Brand: C.R. Laurence Part Number: 30017000
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 48 Quantity Required Per Machine: 1 | *$6.44 |
 | C.R. LAURENCE 30017100 CRL/Somaca Pulley Adjustment Hand Knob for BM106G Machine
Brand: C.R. Laurence Part Number: 30017100
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 53 Quantity Required Per Machine: 2 | *$8.97 |
 | C.R. LAURENCE 30066909 CRL/Somaca Bearing Housing Assembly for BM106G Machine
Brand: C.R. Laurence Part Number: 30066909
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 19 Quantity Required Per Machine: call | *$384.86 |
| C.R. LAURENCE 30118702 CRL/Somaca Roller Shaft for BM106G Machine
Brand: C.R. Laurence Part Number: 30118702
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 44 Quantity Required Per Machine: 1 | *$52.65 |
 | C.R. LAURENCE 30118800 CRL/Somaca Open Cover Plate for BM106G Machine
Brand: C.R. Laurence Part Number: 30118800
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 47 Quantity Required Per Machine: 1 | *$5.84 |
 | C.R. LAURENCE 30127202 CRL/Somaca Shaft for BM106G Machine
Brand: C.R. Laurence Part Number: 30127202
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 23 Quantity Required Per Machine: 1 | *$104.78 |
 | C.R. LAURENCE 30189200 CRL/Somaca Upper Pulley for BM106G Machine
Brand: C.R. Laurence Part Number: 30189200
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 45 Quantity Required Per Machine: 1 | *$168.41 |
 | C.R. LAURENCE 30189700 CRL/Somaca Bearing Housing for BM106G Machine
Brand: C.R. Laurence Part Number: 30189700
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 20 Quantity Required Per Machine: 1 | *$167.32 |
 | C.R. LAURENCE 33986 CRL 8 Plain Steel Disc
Brand: C.R. Laurence Part Number: 33986
C.R. LAURENCE 33986 CRL 8 Plain Steel Disc. Used on the CRL Glastar Studio Beveling System, this plain CRL Steel Disc functions as a backing plate only. Four different types of finishing pads mount to this steel plate with pressure sensitive adhesive. The system is supplied with four steel discs, many shops keep extra discs around for their extra diamond pads.. | *$15.67 |
 | C.R. LAURENCE 35585800 CRL/Somaca Rubber Covered Roller for BM106G Machine
Brand: C.R. Laurence Part Number: 35585800
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 13 Quantity Required Per Machine: 1 | *$280.05 |
| C.R. LAURENCE 35586300 CRL/Somaca Roller Shaft for BM106G Machine
Brand: C.R. Laurence Part Number: 35586300
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 7 Quantity Required Per Machine: 1 | *$42.05 |
| C.R. LAURENCE 35586700 CRL/Somaca Eccentric Lock Nut for BM106G Machine
Brand: C.R. Laurence Part Number: 35586700
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 54 Quantity Required Per Machine: 1 | *$30.66 |
 | C.R. LAURENCE 35586800 CRL/Somaca Eccentric Lock Handle for BM106G Machine
Brand: C.R. Laurence Part Number: 35586800
C.R. LAURENCE 35586800 CRL/Somaca Eccentric Lock Handle for BM106G Machine. This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. . | *$27.02 |
 | C.R. LAURENCE 35587400 CRL/Somaca Roller Support Frame for BM106G Machine
Brand: C.R. Laurence Part Number: 35587400
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 4 Quantity Required Per Machine: 1 | *$149.13 |
 | C.R. LAURENCE 35587800 CRL/Somaca Drain Pan for BM106G Machine
Brand: C.R. Laurence Part Number: 35587800
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 18 Quantity Required Per Machine: 1 | *$101.78 |
| C.R. LAURENCE 35618200 CRL/Somaca Bearing Housing for BM106G Machine
Brand: C.R. Laurence Part Number: 35618200
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 6 Quantity Required Per Machine: 1 | *$105.80 |
 | C.R. LAURENCE 35667200 CRL/Somaca Bearing Cap for BM106G Machine
Brand: C.R. Laurence Part Number: 35667200
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 9 Quantity Required Per Machine: 1 | *$17.15 |
 | C.R. LAURENCE 36443201 Somaca/CRL VE4 Pencil Edge 120-140 Grit Grinding Wheel for 1/8 to 1/4 Glass
Brand: C.R. Laurence Part Number: 36443201
120-140 Grit This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 1/8 to 1/4 inch (3 to 6 millimeter) glass and is designed to run on these edging machines: VE4 (position 1), and VE4PLUS1 (position 1). Dimensions: 7 in (178 mm) | *$558.66 |
 | C.R. LAURENCE 36443205 Somaca/CRL VE2 Plus 2/VE4 Pencil Edge 170-200 Grit Grinding Wheel for 1/8 to 1/4 Glass
Brand: C.R. Laurence Part Number: 36443205
170-200 Grit This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 1/8 to 1/4 inch (3 to 6 millimeter) glass and is designed to run on these edging machines: VEA1, VEM1, VE2, VE2PLUS2, VE4 (position 2), and VE4PLUS1 (position 2). Dimensions: 7 in (178 mm) | *$536.51 |
| C.R. LAURENCE 36443213 Somaca/CRL VE-1P Pencil Edge Wheel for 1/8 to 1/4 Glass
Brand: C.R. Laurence Part Number: 36443213
Spindle Peripheral Edger Wheel for VE1P, and PE11 Edgers This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 1/8 to 1/4 inch (3 to 6 millimeter) glass and is designed to run on these edging machines: VE1P, and PE11. Dimensions: 7 in (178 mm) Grit: 140-170 | *$536.61 |
| C.R. LAURENCE 36881001 Somaca/CRL VE4 Pencil Edge 140-170 Grit Grinding Wheel for 3/16 to 3/8 Glass
Brand: C.R. Laurence Part Number: 36881001
140-170 Grit This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 3/16 to 3/8 inch (5 to 10 millimeter) glass, and is designed to run on the VEA1 and VEM1 Edgers. Dimensions: 7 in (178 mm) | *$658.25 |
 | C.R. LAURENCE 36881005 Somaca/CRL 7 Pencil Edge Grinding Wheel 170-200 Grit for 3/16 to 3/8 Glass
Brand: C.R. Laurence Part Number: 36881005
170-200 Grit This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 3/16 to 3/8 inch (5 to 10 millimeter) glass and is designed to run on these edging machines: VE2 (position 1), VE2PLUS2 (position 1), VE4 (position 2), and VE4PLUS1 (position 2). Dimensions: 7 in (178 mm) | *$680.98 |
| C.R. LAURENCE 36881012 Somaca/CRL VE-1P Pencil Edge Wheel for 3/16 to 3/8 Glass
Brand: C.R. Laurence Part Number: 36881012
Spindle Peripheral Edger Wheel for VE1P and PE11 Edgers This Somaca/CRL 7" Diamond Wheel will grind a pencil edge profile on 1/8 to 1/4 inch (3 to 6 millimeter) glass and is designed to run on these edging machines: VE1P, and PE11. Dimensions: 7 in (178 mm) Grit: 140-170 | *$650.76 |
 | C.R. LAURENCE 3688106 Somaca/CRL Pumice Block
Brand: C.R. Laurence Part Number: 3688106
4" x 2-1/4" x 2-1/2" This Somaca/CRL Pumice Block is used to redress Diamond Wheels to keep them in top operating condition. | *$18.11 |
 | C.R. LAURENCE 36957500 CRL/Somaca Junction Box for BM106G Machine
Brand: C.R. Laurence Part Number: 36957500
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 62 Quantity Required Per Machine: 1 | *$17.36 |
 | C.R. LAURENCE 37028600 CRL/Somaca Electric Junction Box Cover for BM106G Machine
Brand: C.R. Laurence Part Number: 37028600
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 63 Quantity Required Per Machine: 1 | *$16.62 |
 | C.R. LAURENCE 3721240 CRL/Somaca 240X Rubber Polishing Wheel for 1/4 to 3/8 Glass
Brand: C.R. Laurence Part Number: 3721240
For SBE1 Shape Beveller Machine Somaca/CRL SBE1 Polishing Wheels are available from 60 to 400 grits for glass up to 1 inch (25 millimeter) thick. Dimensions: 6 in x 9/16 in (152.4 x 14.2 mm) | *$34.48 |
 | C.R. LAURENCE 3723120 CRL/Somaca 120X Rubber Polishing Wheel for 1/2 to 3/4 Glass
Brand: C.R. Laurence Part Number: 3723120
For SBE1 Shape Beveller Machine Somaca/CRL SBE1 Polishing Wheels are available from 60 to 400 grits for glass up to 1 inch (25 millimeter) thick. Dimensions: 6 in x 9/16 in (152.4 x 14.2 mm) | *$69.53 |
