 | Howse Spike-Tooth Harrow - 3-Point, 5ft. Length
Brand: Howse
Constructed of heavy-duty 3in. channel and 2in. x 2in. angle iron for long-lasting durability. Cultivates soil with 9in. x 3/4in. square spikes. Truck ship. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 60, Blade Type: Spike Tooth | *$599.99 |
 | Howse Middle Buster - 3-Point, Category 1
Brand: Howse
Fits category 1 hitches. Has bolt on 15 in. shovel, 1in. x 4in. bar shank. Digs wide trenches. Good for breaking up hardpan, making shallow trenches and forming seedbeds. Hitch Type: 3 pt, Category Type: 1, Working Depth (in.): 6 to 8, Blade Type: Middle buster | *$159.99 |
 | Howse Sub-Soiler - 3-Point, Category 1
Brand: Howse
Howse sub-soiler digs deep, narrow trenches. Fits category 1 hitches. Constructed of 3/4in. x 6in. bolt on shank. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Depth (in.): 6 - 8, 20 Max., Blade Type: Sub-Soiler | *$174.99 |
 | Howse Grader Blade - 3-Point, 6ft. Length, Model# HFB6
Brand: Howse
For Category I hitch and lift pins. Each has a 1/2in x 6in reversible cutting edge, spring-loaded latch-type tilt and easy full swing. Truck ship. U.S.A. Factory shipped. Working Width (in.): 72, Hitch Type: 3-Point, Category Type: 1, Blade Type: Grader Blade | *$599.99 |
 | Howse Carry All Fork - 3-Point, Category 1, Model# CA100
Brand: Howse
3 point category 1 hitch. 24in. from lift pin to center of forks. U.S.A. Hitch Type: 3-Point, Category Type: 1, Capacity (lbs.): 500, Width Between Forks (in.): 25 | *$179.99 |
| Howse Grader Blade - 7ft., Model# HFB7
Brand: Howse
For Category I hitch and lift pins. Each has a 1/2in x 6in reversible cutting edge, spring-loaded latch-type tilt and easy full swing. Truck ship. U.S.A. Factory shipped. Working Width (in.): 84, Hitch Type: 3-Point, Category Type: 1, Blade Type: Grader Blade | *$619.99 |
 | Howse Grader Blade - 3-Point, Category 0, 4ft. Length, Model# ATVGB48
Brand: Howse
Attach to tractor to move and level soil. Full swivel for easy maneuverability. Heavy-duty frame with powder-coat paint finish for durability. | *$249.99 |
 | Howse Landscape Rake - 3-Point, Category 1, 8ft. Length
Brand: Howse
Heat-treated 5/16in. x 1in. spring steel tines. 360deg rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 96, Blade Type: Landscape Rake, Tines (qty.): 48, Tines per Foot (qty.): 6 | *$629.99 |
 | Howse Middle Buster/Sub-Soiler Combo - 3-Point, Category 1
Brand: Howse
Howse combo attachment of middle buster/sub-soiler comes with 3-pt. shank, middle buster blade and subsoiler blade. U.S.A. Hitch Type: 3 pt, Category Type: 1, Working Depth (in.): 6 to 8, Blade Type: Middle buster and subsoiler blade | *$299.99 |
 | Howse Landscape Rake - 3-Point, Category 1, 5ft. Length, Model# HLR60
Brand: Howse
Heat-treated 5/16in. x 1in. spring steel tines. 360deg rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 60, Blade Type: Landscape Rake, Tines (qty.): 30, Tines per Foot (qty.): 6 | *$499.99 |
 | Howse Landscape Rake - 3-Point, 7ft. Length
Brand: Howse
Heat-treated 5/16in. x 1in. spring steel tines. 360deg rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A. Hitch Type: 3-Point, Working Width (in.): 84, Blade Type: Landscape Rake, Tines (qty.): 42, Tines per Foot (qty.): 6 | *$589.99 |
 | Howse Medium-Duty Post Hole Digger, Model# PHDM26
Brand: Howse
Medium-duty post hole digger for tractors with 35 HP or less. Comes with #2 metric driveshaft. Truck ship. | *$499.99 |
| Howse Landscape Rake - 3-Point, Category 1, 6ft. Length, Model# HLR72
Brand: Howse
Heat-treated 5/16in. x 1in. spring steel tines. 360deg rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! Truck Ship. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 72, Blade Type: Landscape Rake, Tines (qty.): 36, Tines per Foot (qty.): 6 | *$569.99 |
 | Howse Moldboard Plows - 3-Point, Category 1, 14in. Length, Model# MPH114
Brand: Howse
Rugged 1in. x 4in. steel bar construction. 1-bottom design. All have replaceable share and shin. Plows easily connect to a 3-point hitch. Coulter kit (Item# 250199) and depth gauge (Item# 2501990) sold separately. U.S.A. Hitch Type: 3 pt, Category Type: 1 | *$549.99 |
| Howse Landscape Rake - 3-Point, Category 1, 4ft. Length
Brand: Howse
Heat-treated 5/16in. x 1in. spring steel tines. 360deg rotation allows angular and reverse settings. Rugged landscape rakes clean up roadways, beaches and landscape sites fast! Fits category 1 hitches. Large, heavy duty tines dig into the ground, breaking up the crustiest soils! U.S.A. Hitch Type: 3 pt, Category Type: 1, Working Width (in.): 4 ft | *$499.99 |
| Howse Spike-Tooth Harrow - 3-Point, 7ft. Length
Brand: Howse
Constructed of heavy-duty 3in. channel and 2in. x 2in. angle iron for long-lasting durability. Cultivates soil with 9in. x 3/4in. square spikes. Truck ship. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 84, Blade Type: Spike Tooth | *$699.99 |
 | Howse Rough Cut Mower - 3-Point, Category 1, 4ft. Length
Brand: Howse
3-point mowers include PTO driveline and rear swivel wheel. Heavy-duty bar cross braced frame, saucer shaped blade carrier, cast wheel hub 45 HP gearbox, 3-point category 1 hitch, segmented rubber wheel 35RN series drive shaft, 7 1/2in. sides, shearpin protection. Fit category 1 tractors. Chain guard sold separately. U.S.A. Mower Type: Rough Cut, Hitch Type: 3-Point, Category Type: 1, Working Width (in.): 48, Required HP: 15 - 30, Gearbox Rating (HP): 45, PTO Drive Type: Shear Pin | *$899.99 |
 | Ideal 35-815 Short Ship Auger, 1 Inch
Brand: Ideal Part Number: 35-815
Ideal 35-815 Nailbiter Short Ship Auger, 1 InchIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-815 Nailbiter Short Ship Auger, 1 Inch Features:; 7-1/2 inches long with 5 inches of twist; Drills through nails, wood, and other materials; Full length heat treated and tempered for durability; Precision designed and cut screw point to resist breakage. | *$39.45 |
| Ideal 35-816 Short Ship Auger, 1-1/8 Inch
Brand: Ideal Part Number: 35-816
Ideal 35-816 Nailbiter Short Ship Auger, 1-1/8 InchIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-816 Nailbiter Short Ship Auger, 1-1/8 Inch Features:; 7-1/2 inches long with 5 inches of twist; Drills through nails, wood, and other materials; Full length heat treated and tempered for durability; Precision designed and cut screw point to resist breakage. | *$48.78 |
| Ideal 35-828 Power Ship Auger, 1-1/8 Inch
Brand: Ideal Part Number: 35-828
Ideal 35-828 Nailbiter Power Ship Auger, 1-1/8 InchIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-828 Nailbiter Power Ship Auger, 1-1/8 Inch Features:; 17 inches long with 12 inches of twist; Drills through nails, wood, and other materials; Full length heat treated and tempered for durability; Precision designed and cut screw point to resist breakage. | *$27.99 |
 | Ideal 35-864 3/4 x 4-3/4 in. Mini Auger
Brand: Ideal Part Number: 35-864
Ideal 35-864 3/4 X 4-3/4" AugerIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-864 3/4 X 4-3/4" Auger Features:; Designed to fit between wall studs when used with common drills; Eliminates the need for expensive right angle drills. | *$17.91 |
| Ideal 35-866 7/8 x 4-3/4 in. Mini Auger
Brand: Ideal Part Number: 35-866
Ideal 35-866 7/8 X 4-3/4" AugerIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-866 7/8 X 4-3/4" Auger Features:; Designed to fit between wall studs when used with common drills; Eliminates the need for expensive right angle drills. | *$19.36 |
| Ideal 35-868 1 x 4-3/4 in. Mini Auger
Brand: Ideal Part Number: 35-868
Ideal 35-868 1 X 4-3/4" AugerIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-868 1 X 4-3/4" Auger Features:; Designed to fit between wall studs when used with common drills; Eliminates the need for expensive right angle drills. | *$23.34 |
| Ideal 35-862 5/8 x 4-3/4 in. Mini Auger
Brand: Ideal Part Number: 35-862
Ideal 35-862 5/8 X 4-3/4" AugerIDEAL brings you products that make your job easier; products that you can rely on, with warranties you can trust; products that are available whenever and wherever you need them. Ideal Industries divisions are dedicated to the professionals in the Electrical, DataComm, Wire Processing and OEM Connections markets.Ideal 35-862 5/8 X 4-3/4" Auger Features:; Designed to fit between wall studs when used with common drills; Eliminates the need for expensive right angle drills. | *$16.81 |
 | IMD 10 KW PTO GENERATOR
Brand: IMD Model: 10009 Part Number: PTO 10/2S-10009
IMD 10 KW PTO GENERATOR -10000 Watts -Simultaneous 120/240V -Requires minimum 20 PTO Horsepower -Maximum breaker capacity 40A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft | *$1,354.00 |
 | IMD 10 KW PTO GENERATOR KIT
Brand: IMD Model: 10109 Part Number: PTO 10/2S KIT
IMD 10 KW PTO GENERATOR -10000 Watts -Simultaneous 120/240V -Requires minimum 20 PTO Horsepower -Maximum breaker capacity 40A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft -Package comes with Full Power Plug, PTO Drive Line, and 3-Point Hitch Kit | *$1,901.00 |
| IMD 10 KW PTO GENERATOR KIT w/ AVR
Brand: IMD Model: 10110 Part Number: PTO 10/2S AVR KIT
IMD 10 KW PTO GENERATOR w/ AVR -10000 Watts -Simultaneous 120/240V -Requires minimum 20 PTO Horsepower -Maximum breaker capacity 40A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft -Package comes with Full Power Plug, PTO Drive Line, and 3-Point Hitch Kit | *$2,045.00 |
 | IMD 10 KW PTO GENERATOR w/ AVR
Brand: IMD Model: 10010 Part Number: PTO 10/2S AVR
IMD 10 KW PTO GENERATOR w/ AVR -10000 Watts -Simultaneous 120/240V -Requires minimum 20 PTO Horsepower -Maximum breaker capacity 40A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft | *$1,498.00 |
 | IMD 16 KW PTO GENERATOR
Brand: IMD Model: 16001 Part Number: PTO 16/2S
IMD 16 KW PTO GENERATOR -16000 Watts -Simultaneous 120/240V -Requires minimum 33 PTO Horsepower -Maximum breaker capacity 60A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 60A NEMA 1460 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft | *$1,835.00 |
 | IMD 16 KW PTO GENERATOR KIT
Brand: IMD Model: 16101 Part Number: PTO 16/2S KIT
IMD 16 KW PTO GENERATOR -16000 Watts -Simultaneous 120/240V -Requires minimum 33 PTO Horsepower -Maximum breaker capacity 60A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 60A NEMA 1460 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft -Package comes with Full Power Plug, PTO Drive Line, and 3-Point Hitch Kit | *$2,396.00 |
| IMD 16 KW PTO GENERATOR w/ AVR
Brand: IMD Model: 16002 Part Number: PTO 16/2S AVR
IMD 16 KW PTO GENERATOR -16000 Watts -Simultaneous 120/240V -Requires minimum 33 PTO Horsepower -Maximum breaker capacity 60A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 60A NEMA 1460 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft | *$2,037.00 |
| IMD 16 KW PTO GENERATOR w/ AVR KIT
Brand: IMD Model: 16102 Part Number: PTO 16/2S AVR KIT
IMD 16 KW PTO GENERATOR -16000 Watts -Simultaneous 120/240V -Requires minimum 33 PTO Horsepower -Maximum breaker capacity 60A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 60A NEMA 1460 Receptacles -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft -Package comes with Full Power Plug, PTO Drive Line, and 3-Point Hitch Kit | *$2,598.00 |
 | IMD 22 KW PTO GENERATOR
Brand: IMD Model: 22005 Part Number: PTO 22/2S
IMD 22 KW PTO GENERATOR -22000 Watts -Simultaneous 120/240V -Requires minimum 41 PTO Horsepower -Maximum breaker capacity 90A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles, 175A Full power Recptacle -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft | *$2,599.00 |
 | IMD 22 KW PTO GENERATOR KIT
Brand: IMD Model: 22005 Part Number: PTO 22/2S
IMD 22 KW PTO GENERATOR -22000 Watts -Simultaneous 120/240V -Requires minimum 41 PTO Horsepower -Maximum breaker capacity 90A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles, 175A Full power Recptacle -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft -Package comes with Full Power Plug, PTO Drive Line, and 3-Point Hitch Kit | *$3,164.00 |
 | IMD 31 KW PTO GENERATOR
Brand: IMD Model: 31002 Part Number: PTO 31/2S
IMD 31 KW PTO GENERATOR -31000 Watts -Simultaneous 120/240V -Requires minimum 63 PTO Horsepower -Maximum breaker capacity 125A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles, 175A Full power Recptacle -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft | *$3,619.00 |
 | IMD 31 KW PTO GENERATOR KIT
Brand: IMD Model: 31002 Part Number: PTO 31/2S
IMD 31 KW PTO GENERATOR -31000 Watts -Simultaneous 120/240V -Requires minimum 63 PTO Horsepower -Maximum breaker capacity 125A at 240V -Duplex 120V, 20A NEMA 5-20 and Straight Blade 120/240V, 50A NEMA 1450 Receptacles, 175A Full power Recptacle -All Circuits Protected Individually -540 PTO Speed -1-3/8" 6 spline shaft -Package comes with Full Power Plug, PTO Drive Line, and 3-Point Hitch Kit | *$4,309.00 |
 | IMPERIAL 24790 DOUBLE CLEVIS MIDLINK 3/8" (PACK OF 2)
Brand: Imperial Model: 24790 Part Number: 24790
"IMPERIAL" DOUBLE CLEVIS MIDLINK
Double Clevis Mid-Link.
For use with Grade 70 and Grade 40 chain.
Hot forged and heat treated for high strength.
For connecting two lengths of chain together.
Chain Size: 3/8
Working Load Limits: 6,600 lbs.
CAUTION: Working load limits should not | *$49.99 |
| IMPERIAL 24791 DOUBLE CLEVIS MIDLINK 7/16 -1/2" (PACK OF 2)
Brand: Imperial Model: 24791 Part Number: 24791
"IMPERIAL" DOUBLE CLEVIS MIDLINK 7/16 -1/2"
Double Clevis Mid-Link.
For use with Grade 70 and Grade 40 chain.
Hot forged and heat treated for high strength.
For connecting two lengths of chain together.
Chain Size: 7/16 - 1/2.
Working Load Limits: 11,300 lbs. | *$69.99 |
 | Imperial 70197 Insulating Small Snap Bushing 1"dia - Nylon
Brand: Imperial Model: 70197 Part Number: 70197
"IMPERIAL" SNAP BUSHING
Small size
I.D.: 49/64
Head Diameter: 1-1/8
Thickness: 9/16
Panel Hole Diameter: 1
Color: Black
100 per package.
Designed to protect wires, cables, and tubing from rough panel edges.
Employs multiple lock features that snap into place on panels ranging from
1/32 to 1/8 inch thick. | *$43.65 |
| Imperial 70198 Nylon Insulating Snap Bushing 1.187"dia - Medium
Brand: Imperial Model: 70198 Part Number: 70198
"IMPERIAL" SNAP BUSHING
Medium size.
I.D.: 11/16
Head Diameter: 1-9/16
Thickness: 9/16
Panel Hole Diameter: 1-3/16
Color: Black
100 per package.
Designed to protect wires, cables, and tubing from rough panel edges.
Employs multiple lock features that snap into place on panels ranging from
1/32 to 1/8 inch thick. | *$66.59 |
| Imperial 70199 Nylon Insulating Snap Bushing 1.375 Dia - Large
Brand: Imperial Model: 70199 Part Number: 70199
"IMPERIAL" SNAP BUSHING
Large size.
I.D.: 1
Head Diameter: 1-1/2
Thickness: 9/16
Panel Hole Diameter: 1-3/8
Color: Black
100 per package.
Designed to protect wires, cables, and tubing from rough panel edges.
Employs multiple lock features that snap into place on panels ranging from
1/32 to 1/8 inch thick. | *$74.55 |
 | Imperial 73533 Hitch Pin 5/8"x4-3/4"
Brand: Imperial Model: 73533 Part Number: 73533
"IMPERIAL" HITCH PIN
Heat-Treated Hitch Pin.
Plated.
Pin includes a hairpin cotter.
Swivel handle for easy grasping. | *$11.99 |
| Imperial 73534 Hitch Pin 5/8"x6-1/2"
Brand: Imperial Model: 73534 Part Number: 73534
"IMPERIAL" HITCH PIN
Heat-Treated Hitch Pin.
Plated.
Pin includes a hairpin cotter.
Swivel handle for easy grasping. | *$12.99 |
| Imperial 73531 Hitch Pin 1/2"x4-3/4"
Brand: Imperial Model: 73531 Part Number: 73531
"IMPERIAL" HITCH PIN
Heat-Treated Hitch Pin.
Plated.
Pin includes a hairpin cotter.
Swivel handle for easy grasping. | *$8.99 |
| Imperial 73537 Hitch PIN 7/8"x7-1/2"
Brand: Imperial Model: 73537 Part Number: 73537
"IMPERIAL" HITCH PIN
Heat-Treated Hitch Pin.
Plated.
Pin includes a hairpin cotter.
Swivel handle for easy grasping. | *$22.99 |
| Imperial 73535 Hitch Pin 3/4x5"
Brand: Imperial Model: 73535 Part Number: 73535
"IMPERIAL" HITCH PIN
Heat-Treated Hitch Pin.
Plated.
Pin includes a hairpin cotter.
Swivel handle for easy grasping. | *$13.99 |
 | 18x8GRN Goth Fold Fence
Brand: Import Model: 901212A Part Number: 901212A
18" x 8', Green, Gothic Top, PVC Coated, Folding Fence. | *$5.33 |
 | 42" 9-1/2GA Fence Stays
Brand: Import Part Number: 901084A
42", 9-1/2 Gauge, Fence Stays. | *$113.81 |
| 48" 9-1/2GA Fence Stays
Brand: Import Part Number: 901085A
48", 9-1/2 Gauge, Fence Stays. | *$125.31 |
 | Midwest 901154A 4' Light Duty Green Style Fence Post
Brand: Import Model: 901154A Part Number: 901154A
4' , Green, Light Duty, U Style Fence Post, Steel, 14 Gauge. | *$15.99 |
|
